Mods??????? Move to DIY section?????????????
Okay, listen up all you kids!
First:
Open your door.
Second:
Remove the three phillips screws from behind the door rubber, HERE:
Third: Pull the rubber seal out of the door, that the window slides up into and seals around the window. You'll need to pull out the top, and back of door top, about 4 inches or so, and the front down to about the top of the mirror triangle trim piece. Just notice where the visor sits in this pic, that is the area of rubber window track you pull out!
Fourth:
If you look up inside where the rubber used to be, you will notice kind of a track that is in the same shape as your clips on the visors. You hold the visor in place and you can very easily snap those clips into the track behind where the rubber was. I started with the top rear clip, and kind of worked my way toward the front, at the end I just slid it towards the back of the door, and the last clip, by the word "LEGEND" just locked into place.
Fifth: Carefully re-install the winow condom, eeerrrr, rubber, and close the window.
I havn't rolled my windows down yet, and am kind of scared to, cause, they weren't sealing correctly before. But, WTF, my A/C works great, so who needs windows anyway!
More pics:
