|
If everything is out like it is in the last picture I put up, you shouldn't have a problem putting it in. Everything flexes a little bit which should allow you to line up the screws to the guts of the dash. Do you have the radio brackets attached to the two console exterior pieces? If you don't, do that. That way you know exactly how everything needs to sit since the exterior pieces are what screw into the dash guts.
Also, did you switch the module that was on the passenger side USDM brackets to these new JDM brackets? If you didn't, make sure you do that. Thats the dimmer module that controls the brightness of all the interior lights when you turn your headlights on. I have some editing to do.
|