|
I kind of figured I would have to remove the entire door assembly, but was hoping for an easier solution. I've taken the inner panel off a number of times for speaker install and replace the passenger side switch plate.
Just curious if you've got any pointers on removing all of the inners of the door assembly. I know I'm going to have to strip all of the connectors off, and have never done that before. Will also have to worry about the door lock and window/motor assembly.
I'm done a few searches, but can't find any decent DIY on swapping the door/frame out. It's probably going to boil down to combining one for window motor replacement with a door lock actuator swap and improvising the rest......
Thanks again for the help.
|