Quote:
Originally Posted by Edify
I just took apart 2 intake manifolds. One probably 120k miles and the other 163k miles, and the 120k mile manifold was 90% blocked, and the 163k miles manifold was 100% blocked. I was wondering why I couldn't tell the difference when I put the Dv8 block plate in.
Additionally, I had to clean out the IM, because of all the gunk that is deposited in the manifold. Totally useless.
-Ed
|
The EGR block plate should keep the EGR pipe and the bottom of the IM clean once cleaned.
It takes a long time for that gunk to accumulate.
~Dv8
__________________
AEM EMS Powered. 8.5 yrs and counting.
Results, Where are yours?
12.953@107.865MPH 95 deg. Jun. 07'
3.5 6spd-#55 jet Nitrous
316WHP@5500RPM 345Lb-ft@4100RPM NOS 06-07'N/A 234WHP@5700RPM 229lb-ft@4600RPM 06-07'
13.782@99.135MPH N/A 95 deg. Jun 07'
01' Acura CL-S 14.8@94MPH[Sold]
03' G35c
Stock Auto 14.3@96MPH [Not Stock Anymore!]
8 page spread Honda Tuning September 06' issue
No Phone or Instant message, PM or Email only. Respect that!
My Legends Website www.2slik4u.com