|
I want to try to get it done by the end of the month, but as buyers keep rolling in it is cheaper to wait for more buyers for everyone. Any comments on this? I have not gotten word of anyone in a rush? Let me know if you or anyone is in a hurry to get this done. Until then our patience will save us money.
Akmopowr,
I am sorry to hear about the PS issue. Your car is the first I have been notified of having this issue(the pulley falling off). The splines were initially cut incorrectly and I sent out a sort of "recall" to either replace or repair the PS pulley if sent back to me. To date I have had no repeat issues with them after repair. My guess is that the mechanic did what he thought was right by installing the washer/ spacer. THere was probably some friction between the washer-bearing-PS housing possibly creating a slight vibration/ wobble to cause the nut to come loose. Really, he shouldnt have tightened the pulley down so hard that it rubbed the PS housing at all. Please send me the pulley back so I can inspect it (so this does not happen again or to any future buyers) for the true cause of this accident. I am thinking it was just overtightened initally as the aluminum is soft and the splines go all the way through on the aftermarket pulley. Notice the splines on the stock pulley end at a certain point inside of the stock pulley. THat is where you stop tightening it down for both pulleys. I will more than likely replace the pulley for you at no cost being that this is most likely due to a product flaw.
Hope this cheers you up on the weekend!
1.FromaQ - Full Set
2.filmshoot - Full Set
3.music2bmurderedby-3 Pulleys(ALT, Tensioner, PS)
4. whats77inaname-3 Pulleys(ALT, Tensioner, PS)
5. llloydxmas-PS Only
6. BayAreasFinest-Full Set
7. legend coupe- Full Set
Thanks! Kyle
|