The Acura Legend & Acura RL Forum - View Single Post

91LSplendid · 04-25-08, 02:56 PM

For Step 8 have the correct tools. The little screws (one on each side) are upside down and there is not a lot of space between the car and the screw head. It was a little weird to get these off due to the postioning and would be easier with a 2nd person (your son?) holding up the rails for you, but can be done solo.

The DIY mentions using needle nose pliers, another member used a small vice grip, but I used and ratcheting offset screwdriver I purchased at Lowe's for under $5.

for some other small hints I found helpful when I did mine see Additional Benefit of the Sunroof Tilt Mod

Good luck.
.

04-25-08, 02:56 PM	#84 (permalink)
91LSplendid Registered User Join Date: Oct 2007 Location: Upstate, NY Posts: 1,152 Car 1: 1991 Legend LS Sedan Car 2: 2006 Grand Caravan iTrader: (2)	For Step 8 have the correct tools. The little screws (one on each side) are upside down and there is not a lot of space between the car and the screw head. It was a little weird to get these off due to the postioning and would be easier with a 2nd person (your son?) holding up the rails for you, but can be done solo. The DIY mentions using needle nose pliers, another member used a small vice grip, but I used and ratcheting offset screwdriver I purchased at Lowe's for under $5. for some other small hints I found helpful when I did mine see Additional Benefit of the Sunroof Tilt Mod Good luck. . __________________ *John aka: Splendid* '91 LS - Golden Glow Pearl Clearcoat w/ Ivory Leather 93K miles Mods 7 Spoke OEM Machined Rims, Sunroof Tilt, Armrest w/ Cupholder, Iggee Seat Covers w/ Controls mod. UnMods Removed tint Gallery Pictures Link DIY's 1) How to Install Iggee Front Seat Covers 2) Iggee front seat covers w/ seat controls mod .