|
Well i got the wiring almost fininshed and all the injectors back in. I only have a couple of problems maybe big maybe not. the first is the distributer is controlled by 3 wires instead of 2. there are 2 wires the same and one goes to a small box on the side of the distributer, no idea what its for i might just have to wire it up with the 2 wires and see what happens. the second is there is a set of wires to the right of the TB as you look at it from above the atou trans that go in under the intake manifold. There is no connection for thin on the wiring loom so it is yo a sensor that isnt on the N/A motor and i cant trace where it goes. the third is the O2 sensors i think i may try and use the original ones and see what happens.
__________________
|