Thread: What Would You Like to See Next from Blackend Motorsports?
View Single Post
Old 06-22-08, 11:01 PM   #164 (permalink)
Blackend
Blackend Motorsports
 
Blackend's Avatar
 
Join Date: Apr 2004
Location: DFW Area
Posts: 4,256


Car 1: Blackend Motorsports
Car 2: 1995 LS Coupe



iTrader: (23)
Send a message via AIM to Blackend Send a message via Yahoo to Blackend
Quote:
Originally Posted by The Crowing View Post
Something I'd pay a rediculous amount for, and I'm sure MANY people on here will also buy:

Headlight. Covers.

eBay has a few up at anytime for a sedan, but I've never actually seen what the "Legend Specific" covers actually look like, look like installed, and if they are worth buying.

I, personally, have a coupe, and am constantly frustrated at not being able to find headlight covers for my car.

I'm not talking about a vinyl overlay, either. I want an actual piece of plastic I can fasten over my headlights, and I want it smoked. If you developed a mold for these covers, you really could make any color and shade under the sun.

The reason I'm so desperate for these? Well, after $350 for black-housing JDM lights, $250 for projectors, $35 for angel eyes, $150 in labor chargers, and $325 for two HID kits, I want my headlights protected and protected well. I'm sure many others on here would at least want a clear one to protect their own investments as well. Glass Euro's, anyone?

As I see it, it would be cheap to make, in comparison to your other conquests right now, could be in production quickly, and potentially turn up a huge profit.
How much HP you think we could get from those...?

Quote:
Originally Posted by emaculate91ls View Post
Its been 3 months since your last update, how is you buddy doing?
He's better - I posted an update on the BBK in THIS POST

Quote:
Originally Posted by brynosaur View Post
blackend g2 cold air box? weapon-r isnt selling theirs anymore.
You're the 2nd person in a week asking for this - and I'll copy in my response:
I'm actually trying to talk Phil into making the 1 piece CAI again. The problem with a CAB is that there is still heat soak and the gains are minimal over a SRI...in fact, the box has less "fresh" air going into it since it's not drawing from the grill opening, but pulling from below the bumper. What I really want to do is add a plastic intake funnel that would mount on the outside edge of the lower bumper opening for more of a ram effect and then run it to the CAI...
__________________


G2 Legend Engine Dampers NOW IN STOCK! Click Here!

Quote:
Originally Posted by MountainLegend View Post
and just my .02, you may be good, and you probalby have some skill, but you do come off as an total assneck...better to say nothing, goto NALM '09 and rock the hut on the autocross and shut them up and let eveyone tell you how good you are, not vice versa...and around here, they build them, race them, wreck them, and then post the story, share the vid, then trade the parts around of what still works... this is not like any other car forum...
Blackend is offline   Reply With Quote