The Acura Legend & Acura RL Forum - View Single Post - Lusting for a twin turbo setup, and would like (helpful) ideas

Telion · 07-01-08, 11:47 PM

Now we're cookin thank you everyone for the wonderful dissertations (good) A lot of the formula stuff I do not nor will I pretend to understand so to have it broken down is very useful for myself and many others I am sure.

Yes Vic I am kinda allover the place while at the same time very focused with the intent to make FI happen for my car in a successful way. but none the less keep the great info and setup ideas coming and hopefully before long I will have some pipes bent and welded up to get to the next step.

I do have an important question though, running one 3" pipe in to feed the two turbos and another 3" pipe for the exhaust side of the turbos and splitting it back out, what would be the positives and negatives of this?
And yes I know some of you may go back to the train of thought why not just run one. Grump said it best it would be cool. (amungst other theories)

Reboticon thank you for the info, it is pretty much the plan but not with the headers (yet). For now I am going to mock it up with PVC and weld it locally.

07-01-08, 11:47 PM	#64 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,332 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	Now we're cookin thank you everyone for the wonderful dissertations (good) A lot of the formula stuff I do not nor will I pretend to understand so to have it broken down is very useful for myself and many others I am sure. Yes Vic I am kinda allover the place while at the same time very focused with the intent to make FI happen for my car in a successful way. but none the less keep the great info and setup ideas coming and hopefully before long I will have some pipes bent and welded up to get to the next step. I do have an important question though, running one 3" pipe in to feed the two turbos and another 3" pipe for the exhaust side of the turbos and splitting it back out, what would be the positives and negatives of this? And yes I know some of you may go back to the train of thought why not just run one. Grump said it best it would be cool. (amungst other theories) Reboticon thank you for the info, it is pretty much the plan but not with the headers (yet). For now I am going to mock it up with PVC and weld it locally. __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come.