The Acura Legend & Acura RL Forum - View Single Post - DIY Transmission Service (Filter + Drain)

Smalltalk · 09-05-08, 07:55 PM

Sorry for the delay. No - you don't need to fuss with the wiring harness just to do the Pan and Filter / Screen.

Just watch the difference between Pan Gaskets. There are two different ones listed - PY4 and PH5. As seen in the picture in my DIY, the code is visible on the bottom of your pan - so crawl under the car and make sure before you order it. I bought two gaskets, in case something went wrong and I had to disassemble it again. But at $14 apiece, you might not go that route.

Good luck!

09-05-08, 07:55 PM	#81 (permalink)
Smalltalk Registered User Join Date: Apr 2007 Location: New Jersey Posts: 23 Car 1: 1995 Acura Legend iTrader: (0)	No Wiring Harness Fuss for Pan Only Sorry for the delay. No - you don't need to fuss with the wiring harness just to do the Pan and Filter / Screen. Just watch the difference between Pan Gaskets. There are two different ones listed - PY4 and PH5. As seen in the picture in my DIY, the code is visible on the bottom of your pan - so crawl under the car and make sure before you order it. I bought two gaskets, in case something went wrong and I had to disassemble it again. But at $14 apiece, you might not go that route. Good luck!