|
Re: acura legend
Like LUVMYLEGEND and Chris said..
itīs very very simple! If you have an ATM (Automatic Transmission), you must (flat screw driver) pull out the small black cover, then remove the 2 screws and finally pull gently the whole wood panel. Be careful: ONLY PULL this panel ! This panel contains 6 metal clip holder (2x upper, 2x in the center and 2x lower).
At the next step, you can finally pull out the radio, After this, you must pull out the...
- snap-in wiring plug
- antenna cable
- 7-pin DIN cable (CD changer)
- 5-pin of Audio control
Thatīs all !
Mike / Cologne (Germany)
|