Hey guys,
Installed a B&M fuel pressure gauge this morning. The reasons include wanting to make sure my pump was putting out correct pressure and the possibility of future fuel pressure modifications that will require a quantitative measurement of pressure.
It's an easy install...took about 10 minutes...mounts right on top of the fuel filter throgh the use of a new banjo bolt that comes in the kit. Clearance is minimal though...barely clears the hood when down (see last photo).
Fuel rail is at 32psi ...from what I've read that is about right.
Let me know if you have any questions.
Later
__________________
1990 LS coupe - 5 speed - 160,000 miles
ram CAI -
grounding wires - B&M FPR and gauge
D/S rotors - ceramic pads - SS brake lines -
driving lights
alpine HU - infinity components - profile 4ch amp
"My other love is a Ford Bronco"