|
I had some trouble getting mine in tune the first time until I followed this tip.
Remove the spark plugs! Set the drivers side cam pulley right on the timing mark, set the pass. side cam pulley on the timing mark then rotate the pully towards the engine about 1/2 of a tooth. Set the crankshaft right on the timing mark. Install the belt starting at the crankshaft then tensioner the pass. cam pulley ect.. Loosen the tensioner bolt to allow the tensioner to tighten the belt then tighten it back. Rotate the engine through 6 times and check the timing marks, they should be right on. Loosen the tensioner bolt again and retighten it.
I had trouble with this until I used the 1/2 tooth tip
__________________
People are often reluctant to pay for good advice but rarely follow free advice.
|