Originally Posted by Mike Diaz

First, fill the overflow jug to the MAX line.

Then when the car is cold, pop the radiator cap off and fill it to the top.

Next, start the car and turn the heat on high.

Then, open the bleeder valve (12mm valve on top of the engine, at the end of the upper radiator hose), and keep the coolant full.

When the fan kicks on the first time, close the bleeder valve. All the while, making sure the coolant is full in the radiator.

After each cycle of the radiator fan, open and close the bleeder valve within 3-4 seconds. Keep filling the radiator.

After about 4-5 times doing this, you should be good. Put the radiator cap back on and make sure your overflow jug is at the MAX line.