hybirdgsrlegend

not at all swift built that mf in your advatar.... when you was negitve about when he built it but there you go and now you got one .... i have pics of the origanil built over a year ago.... do you...

__________________
Web cam shaft info and prices Pm telion

 

sr5guy

Don't sweat it. Technically he needs to be sterilized anyway . Hey did you get the message that the mod-in-training program was ended when the board was sold?

-Matt

__________________
The dude with a chip on his shoulder.

Stop asking me to compare my chip with Telion's damnit. Mines better.

sr5guy

I think the problem is that you don't have any IDEA what you're talking about. From what I can see, Christian has a custom built manifold. Its a general design used in MANY different forms for forced induction race applications. I think it was more influenced from Gary Depriest's and BUZZARD's (chris) manifold ideas than swift's box-o'luminum. Have you ever seen this?





I think the question is who's design idea swift copied. How about this OEM Audi S4 manifold.... looks familiar, huh?

Attached Images

 

__________________
The dude with a chip on his shoulder.

Stop asking me to compare my chip with Telion's damnit. Mines better.

Dv8

No man, you got it all wrong. My manifolds been in the works for quite some time. Gary Depriest's Legend race car was an inspiration, along with a LS1/2 manifold. I saw Swifts manifold and gave him props for it at the time. Go ahead and search if you don’t believe me.

Our manifolds look kind of similar but the similarities stop there. Mine's 100x more professional to start off the comparisons. I had to build a custom intake manifold to fit my wider heads perfectly since they're T2 heads on a 3.5 bottom end. I'm the only person with that combo on these forums so clearly I didn’t steal someone else’s idea. Not to mention I preformed the first 3.5 swap and T2 in a 91 back in the day. To go on further, the runner length and box design was all calculated for use with F/I.

If you think swift got banned because I wanted to steal his manifold idea then you need to check yourself into a hospital because you’re nuts. Check his profile, he got banned because he acts and reasons like a child and never grew up.

I was cruising through MY thread looking for cam info for another member when I saw swift’s response about blowing up our legend on the dyno using the EMS. I didn’t blow it up, I ran 12's on the 1/4 and made 345ftlb to the wheels instead. Further proof, most of the time he doesn’t know what he’s talking about.
Its not my fault he got banned; you need more than 1 point to get banned.



Mine


Swift's



Now lets discuss you calling me out and calling a MOD, a Jack ass.

I could have gone into your thread and gave you my 2 cents on how much of a waste of time and money it would be to convert over to a GS, but I didnt, I kept out.

Keep out of things you dont understand or your stay here will be bittersweet.


~Dv8



Amen to that bro!

__________________

AEM EMS Powered. 9 yrs and counting. Results, Where are yours? 12.953@107.865MPH 95 deg. Jun. 07'

3.5 6spd-#55 jet Nitrous 316WHP@5500RPM 345Lb-ft@4100RPM NOS 06-07'N/A 234WHP@5700RPM 229lb-ft@4600RPM 06-07'
13.782@99.135MPH N/A 95 deg. Jun 07'
03' G35c Auto Vortech Supercharged pshhhh 14.3@96MPH-Stock

8 page spread Honda Tuning September 06' issue


No Phone or Instant message, PM or Email only. Respect that!

My Legends Website www.2slik4u.com

93LegendSedan

Bahahah, remember when swift was here?

Pft.

Thanks to Christian the, "terrible mod", we have some useful and insightful info.

God-forbid that happens.

__________________

hybirdgsrlegend

Okay whether or not you a mod or not when i stated "jack ass " i meant like a donkey .... and thats not a cuss word it dosen't matter... and besides its my opinion and i have the freedom to speak that so according to the rules you cant even give me points for doing so.... i feel that there is no public apology needed. and isn't blackmail illegal by you stating if i don't publicly apologize that you are gonna give me the according points

__________________
Web cam shaft info and prices Pm telion

Forevralegend

sweet manifold dv8, i wish i had one of my own with a set of turbos of course haha

__________________
mods-
2.5" mandrel exhaust, deleted cat, cold air intake, web cam regrinds, comp cam valve springs, port & polish heads and manifold, tb bypass, egr block, five speed clutch/flywheel, 80a polyurethane mounts all around, type 1 pulley, headers,re-fabed y-pipe, SR5guy Custom Chip, 6speed swap, safc II, strut bar, F/R sway bars, FL tie bars, ksports,tune
243.3 hp 197.7 ftlb N/A dynapack before manual swap
232.8 hp 204.0 ftlb N/A dynojet 10/19/07
13.737 1/4 mile @ 100.207 mph & 2.012 60' NA

Dv8

We'll see.

~Dv8

__________________

AEM EMS Powered. 9 yrs and counting. Results, Where are yours? 12.953@107.865MPH 95 deg. Jun. 07'

3.5 6spd-#55 jet Nitrous 316WHP@5500RPM 345Lb-ft@4100RPM NOS 06-07'N/A 234WHP@5700RPM 229lb-ft@4600RPM 06-07'
13.782@99.135MPH N/A 95 deg. Jun 07'
03' G35c Auto Vortech Supercharged pshhhh 14.3@96MPH-Stock

8 page spread Honda Tuning September 06' issue


No Phone or Instant message, PM or Email only. Respect that!

My Legends Website www.2slik4u.com

sr5guy

Classic sig material.

-Matt

__________________
The dude with a chip on his shoulder.

Stop asking me to compare my chip with Telion's damnit. Mines better.

sam o nela

Wow...talk about sticking your dick where it doesnt belong....

I thought this 17-year-old kid had already grown up a little in his short time here...guess I was wrong

Dude if you like Swift so much, keep up your cute little kid attitude and you'll be with him permanently soon enough...

__________________


<Monocolor Paint Scheme> <JDM Clear Corners> <Cleared out Rear Turn Signals>
<Acura Caliper Grill Emblem> <Independent Yellow Fog Mod> <15% Tint>
<Iggee Seat Covers> <EL Reverse Glow Gauges> <Dimmer Mod>
<Ford Taurus Cupholder Mod> <CC Tunk Light Mod> <Fut Short Throw Shifter>
<Custom CAI> <AEM Bypass Valve> <OBX Headers>
<Magnaflow High Flow Cat> <Dynomax Super Turbo Muffler>
<Drilled/Slotted Rotors> <Painted Calipers> <Axxis Metal Master Pads>

Edify

Lol....I couldn't believe what I was reading, and whether or not he actually ment that as a compliment.....?!???

-Ed

__________________
Custom CAI - sr5guy stage II chip - EGR Block - TB Bypass - Blackend's Damper - Custom 2" Y Pipe - Magnaflow Cat - 2.5" B Pipe - Type II IM - Labrat Crank Pulley - NA1 NSX Rims - ME 6000k HID. 14.99 @ 94.12 before manifold, pulley, & rims.

Though I've fallen to the Dark Side!

1_Hot_Legend_LS

<<< Just sitting back watching and LOL!!

__________________
Thank You,

L. Downes
O-Town Legends C.C.
Winter Haven, FL

_______________________

Forum Rules
Tapped (Term used mainly in New England) = Crazy + Stupid
Contact me at: otown_legends_cc@yahoo.com

91LS 3.5

SMH, What a sorry excuse for a cop-out.

__________________

Im a legend DR.

lgnd4u2nv

so what you were trying to say is

"it sure seems to me and all other forum members that your a donkey who steals peoples ideas and then bans them"

that just makes you sound like an idiot.



DV8 is one of the ORIGINAL legend modifiers....he doesnt steal peoples ideas, he pioneers them.



DV8 - that manifold looks awesome! i cant wait to see more of the project.

__________________


The Performance Handling Sedan
Ksport Coilovers, MLS strut bar, Fut's rear tie bars, ADDCO rear sway bar


MAY 10TH CHARLOTTE NC LEGEND MEET! CLICK HERE

Winter NC meet picture and discussion thread!