Antares

hey i found these flywheels on Ebay. I wanna do the five speed slutch swap and i need a flywheel. has any body gotten one of these or know anyone that has. I just wanna make sure they are legit, they arent too expensive so it would be sweet if it worked out. thanks.

__________________
Chuck - "...Yea I know rain then snow, you guys are killing me." Ethan - "Chuck, you still have sparkles in your PAINT!" - NALM



MODS
Weapon R Secret Weapon - MLS Copy Bar - Ranger Joe Short Shifter - Cross Drilled/Slotted Rotors - Labrat Pullies - Black Housed Retrofitted JDM one Peices - 4300K Bi Xenon HIDs - Blackend Engine Damper - Fut Rear Tie Bars - Stromung Cat-Back

SOON
NRG Custom Grounding Kit - 5 Speed Clutch and Flywheel Stage 2 - Telion Chip

 

Antares

eBay Store – AUTO WHSE 1: Search results for acura legend flywheel.
heres the link

__________________
Chuck - "...Yea I know rain then snow, you guys are killing me." Ethan - "Chuck, you still have sparkles in your PAINT!" - NALM



MODS
Weapon R Secret Weapon - MLS Copy Bar - Ranger Joe Short Shifter - Cross Drilled/Slotted Rotors - Labrat Pullies - Black Housed Retrofitted JDM one Peices - 4300K Bi Xenon HIDs - Blackend Engine Damper - Fut Rear Tie Bars - Stromung Cat-Back

SOON
NRG Custom Grounding Kit - 5 Speed Clutch and Flywheel Stage 2 - Telion Chip

Forevralegend

hmm yea i saw those a while ago too.. i wouldn't trust them.. just get a used 5 speed flywheel and have it inspected and resurfaced.

__________________
mods-
2.5" mandrel exhaust, deleted cat, cold air intake, web cam regrinds, comp cam valve springs, port & polish heads and manifold, tb bypass, egr block, five speed clutch/flywheel, 80a polyurethane mounts all around, type 1 pulley, headers,re-fabed y-pipe, SR5guy Custom Chip, 6speed swap, safc II, strut bar, F/R sway bars, FL tie bars, ksports,tune
243.3 hp 197.7 ftlb N/A dynapack before manual swap
232.8 hp 204.0 ftlb N/A dynojet 10/19/07
13.737 1/4 mile @ 100.207 mph & 2.012 60' NA

Antares

hmmm... any idea how much that would be?

__________________
Chuck - "...Yea I know rain then snow, you guys are killing me." Ethan - "Chuck, you still have sparkles in your PAINT!" - NALM



MODS
Weapon R Secret Weapon - MLS Copy Bar - Ranger Joe Short Shifter - Cross Drilled/Slotted Rotors - Labrat Pullies - Black Housed Retrofitted JDM one Peices - 4300K Bi Xenon HIDs - Blackend Engine Damper - Fut Rear Tie Bars - Stromung Cat-Back

SOON
NRG Custom Grounding Kit - 5 Speed Clutch and Flywheel Stage 2 - Telion Chip

Forevralegend

i bought a used 5speed flywheel for 40 bucks just search on car-parts.com resurfacing and inspecting cost me about 50 bucks.

__________________
mods-
2.5" mandrel exhaust, deleted cat, cold air intake, web cam regrinds, comp cam valve springs, port & polish heads and manifold, tb bypass, egr block, five speed clutch/flywheel, 80a polyurethane mounts all around, type 1 pulley, headers,re-fabed y-pipe, SR5guy Custom Chip, 6speed swap, safc II, strut bar, F/R sway bars, FL tie bars, ksports,tune
243.3 hp 197.7 ftlb N/A dynapack before manual swap
232.8 hp 204.0 ftlb N/A dynojet 10/19/07
13.737 1/4 mile @ 100.207 mph & 2.012 60' NA

jkurl

I got a rusty one from the junkyard and I think it was $80, it still needs resurfacing which I forget the quote but think was more than $50, plus lightening was at least another $100 plus depending on how much the shave off. that ebay deal sounds good to me, I thought the 5 speed flywheels were not that common so to me the price seems good.

edit those look like G1 5spd flywheels btw.

__________________

95L 3.5 A/T 4dr 171K • 94LS 2dr 6spd 181K project • Little Bro 93LS A/T 4dr

95legend_type2

Whenever I was buying parts for the 5 speed setup I tried that same exact place that you are asking about for a 5 speed flywheel. I ordered it and about a week later they told me that they didnt have any, but on the ebay page it said that they had 10 or so. So then I had to find a used one. Just find a used one and get it resurfaced.

__________________

KMS Strut Bar, EGR block off plate, CAI, Intrax Lowering Springs, Ingalls Front and Rear Camber Kits, ADDCO Rear Sway Bar, Carbon Fiber Hood, Rotor Works cross drilled/slotted rotors, 17" Rota Subzero's, 5 speed Spec Stage 2+ clutch, OBX Headers, Magnaflow Muffler, Greddy B-Pipe and Axleback, sr5guy's stage 3 chipped ECU, Tinted Windows, 10,000K HID Low Beams, Smoked Taillights, Smoked Corner and Bumper Lights, Custom Made Short Throw Shifter

Forevralegend

i wouldn't trust that cheap of a flywheel.. if its crappy material it will warp on you..

__________________
mods-
2.5" mandrel exhaust, deleted cat, cold air intake, web cam regrinds, comp cam valve springs, port & polish heads and manifold, tb bypass, egr block, five speed clutch/flywheel, 80a polyurethane mounts all around, type 1 pulley, headers,re-fabed y-pipe, SR5guy Custom Chip, 6speed swap, safc II, strut bar, F/R sway bars, FL tie bars, ksports,tune
243.3 hp 197.7 ftlb N/A dynapack before manual swap
232.8 hp 204.0 ftlb N/A dynojet 10/19/07
13.737 1/4 mile @ 100.207 mph & 2.012 60' NA

Antares

yea im going trough a junk yard. where would i go to get it resurfaced, maybe lightened?

__________________
Chuck - "...Yea I know rain then snow, you guys are killing me." Ethan - "Chuck, you still have sparkles in your PAINT!" - NALM



MODS
Weapon R Secret Weapon - MLS Copy Bar - Ranger Joe Short Shifter - Cross Drilled/Slotted Rotors - Labrat Pullies - Black Housed Retrofitted JDM one Peices - 4300K Bi Xenon HIDs - Blackend Engine Damper - Fut Rear Tie Bars - Stromung Cat-Back

SOON
NRG Custom Grounding Kit - 5 Speed Clutch and Flywheel Stage 2 - Telion Chip

Forevralegend

i dont know of any places near you, just search for machine shops that are automotive related.. i was going to get mine lightened too but it would have cost 150 bucks just to take off a pound or less since there isn't much excess material on the 5 speed fly's to begin with. So i didnt think it was worth it.

__________________
mods-
2.5" mandrel exhaust, deleted cat, cold air intake, web cam regrinds, comp cam valve springs, port & polish heads and manifold, tb bypass, egr block, five speed clutch/flywheel, 80a polyurethane mounts all around, type 1 pulley, headers,re-fabed y-pipe, SR5guy Custom Chip, 6speed swap, safc II, strut bar, F/R sway bars, FL tie bars, ksports,tune
243.3 hp 197.7 ftlb N/A dynapack before manual swap
232.8 hp 204.0 ftlb N/A dynojet 10/19/07
13.737 1/4 mile @ 100.207 mph & 2.012 60' NA

efashion89,91legend

I currently have this flywheel Installed on my legend. I didnt do any modifications to It. No problems so far. Its been 2 months. I also got a cheap stage 3 clutch from ezclutch off of ebay.

__________________
MODS:Cold Air Induction CAI, OBX Headers, Custom Catback Exhaust, Widemouth NOPI Muffler, Type 2 Intake manifold, 6-Speed tranny, 5-Speed Stage-3 Clutch Kit, Aftermarket Flywheel, X3 Racing Evo 8 Racing Seats, RECARO JDM Racing Seat Brackets, Grant Racing Stering Wheel, 18 Inch Chrome Limited 357 rims,

blkonblkcpe

Paid $45.00 shipped thru car-part.com, junkyard in Colorado. Had to resurface but hey, also $3.45 ea. for bolts at AOA....................

__________________

DEMOCRACY IS TWO WOLVES AND A LAMB VOTING ON WHAT TO HAVE FOR LUNCH. LIBERTY IS A WELL ARMED LAMB CONTESTING THE VOTE.

Forevralegend

did you weigh the flywheel?

__________________
mods-
2.5" mandrel exhaust, deleted cat, cold air intake, web cam regrinds, comp cam valve springs, port & polish heads and manifold, tb bypass, egr block, five speed clutch/flywheel, 80a polyurethane mounts all around, type 1 pulley, headers,re-fabed y-pipe, SR5guy Custom Chip, 6speed swap, safc II, strut bar, F/R sway bars, FL tie bars, ksports,tune
243.3 hp 197.7 ftlb N/A dynapack before manual swap
232.8 hp 204.0 ftlb N/A dynojet 10/19/07
13.737 1/4 mile @ 100.207 mph & 2.012 60' NA

efashion89,91legend

No I didnt. I wll email the seller about the weight and get back to U. If I remember the weight is pretty much the same as the oem flywheel 19-25 lbs. U can also ask the seller questions yourself. I didnt not reduce the weight of the flywheel at all I wanted to but the machine shop I went to "Chixx In Marietta georgia" recomended not to lighten the flywheel so I didnt. the reason I purchased another flywheel was to save down time of removing the old flywheel, getting It resurfased, then finally the Installation. Its a good thing I did that to because my OEM flywheel was Cracked. That what was causing the chattering noise In my clutch.

__________________
MODS:Cold Air Induction CAI, OBX Headers, Custom Catback Exhaust, Widemouth NOPI Muffler, Type 2 Intake manifold, 6-Speed tranny, 5-Speed Stage-3 Clutch Kit, Aftermarket Flywheel, X3 Racing Evo 8 Racing Seats, RECARO JDM Racing Seat Brackets, Grant Racing Stering Wheel, 18 Inch Chrome Limited 357 rims,