ECU Codes and what they mean...G1 & G2 - Page 6

cjzerocool · 04-26-09, 05:46 PM

if someone could take a picture of where the connector is for checking the codes.......BUT take one from a slightly farther distance like 2 feet back so we can get a better idea of where it is located.....

Thanks

Honda Power · 06-29-09, 07:07 PM

I head a quick look at most post in this thread but can't find the exact position of the 2 wires i know its under the carpet in the passenger side but where? does some one have a picture where it's located,

And how quick can you access them i thought it might be a handy thing to check out while buying a Legend.

Quaraxkad · 06-29-09, 08:47 PM

Yellow and black wires, here:

Honda Power · 06-30-09, 03:49 AM

Thanks,
so under the glove box tot the right

vr4god · 10-24-09, 06:48 PM

Where is the connector exactly on a 1995 legend? Is it in the same place as posted above? I have looked and looked and cannot find it. Driving me crazy. It cant be that hard to find. Where the H... is it? FOUND IT!! So I put the paper clip in and I get nothing. What am I doing wrong? How far does it go in? There are only 2 holes it can go into right? I am getting no reading but the CEL always comes on. So need some help guys. Dont know a thing about these cars as I said it is my wifes car, but I am learning. Thank you in advance.

email me at vr4god@msn.com

Dave

Quaraxkad · 11-02-09, 08:36 PM

Quote:

Originally Posted by vr4god

So I put the paper clip in and I get nothing. What am I doing wrong? How far does it go in? There are only 2 holes it can go into right? I am getting no reading but the CEL always comes on. So need some help guys. Dont know a thing about these cars as I said it is my wifes car, but I am learning. Thank you in advance.

Check here to make sure you're doing it all correctly: G2: DIY: Diagnosis: Pulling Codes - LegendWiki

It's also possible your paper clip just isn't making the connection.