BlackWater68

hey everybody im new here and i picked up a 1988 legend coupe 5 speed last year.unfortunatly...my father and i started digging into it the other day as it needs some work.well under the car towards the front it seems like theres the 2 frame rails that join into the front end and at that joint there is some major rust on both sides.also there is a good size hole in the rail in the back on the drivers side next to the strut. any thoughts on what to do about this? i really dont want to get rid of the car or part it out because i do like it, but my father probably isnt going to go for a professional fabricator because of the cost and we dont have the resources to do it ourselves.

 

KAHruzer

I'm thinking you may have answered your own question.

If it's truly frame rot, nothing but custom fab repair is going to fix it.
And, it may not be possible. Amounts to welding plates over the rot to solid connection points.

Even then, the rest of the metal underneath may be just as bad and not far from failure. A good checking is in order.

Good luck with that.

__________________
Stock 1987 Legend LS Coupe 180k (11/07)

l4zy415

Welcome and so sorry to hear about the rust. Ya, the only way to get rid of the rust is to cut them out and put new ones in. You don't want to drive around like that with rust cause it'll snap in half. Its hard to say this but, its best to keep that Legend and sell it for parts or find another Legend and use the first Legend for parts on it. Best of luck with ya mayne.

__________________

My Legend Is Rising Back From Hell!!!! BEWARE.
18" Limited 341 Chrome Rims
Matador Red Paint
Weapon R - Secret Weapon Intake
LED Bright White Dash Lights/Floor
Kenwood KDC-X590 Excelon Mp3 Deck
Ford Taurus Coin/Cup Holder
2 12" Kickers
1200 Watt Sony XM-2200GTX 2-Channel Xplod Amp
2 Rockford Fosgate Capacitors
Power Acoustic Capacitor
Clear Rear Turn Signal
Reverse Glow Gauges
Soon To Come: Rebuild Motor and 5-MT Swap

Ophidian

Pics of the holes and rust??

__________________

35% Tint
MA 6.5" front
Cold Air Intake
H.O. Alternator
Eclipse AVN6610
JL Audio A4300 amp
Focal Access 6x9's rear
Stromung muffler from GB
Clifford Matrix 50.5x alarm

Waiting to be installed:
Front strut tower bar
Orion HCCA 2100 amp
2 12" Cadence Daytona competition subs

BlackWater68

ill try to get some pictures up tomorrow.

pnoye2

I'd limit driving this car around OP... welcome to the community!

__________________
289K+ miles on original drive/power trains

BlackWater68

drivers side rear.

under car towards front.these 2(1 on passenger side too but not as bad)dont appear to be complete holes yet.theres also holes in the corners of the footwells but im concerned about the frame.

sam o nela

Wow I just made one of the worst cringe noises I've ever made....I'm speechless man....

__________________


<Monocolor Paint Scheme> <JDM Clear Corners> <Cleared out Rear Turn Signals>
<Acura Caliper Grill Emblem> <Independent Yellow Fog Mod> <15% Tint>
<Iggee Seat Covers> <EL Reverse Glow Gauges> <Dimmer Mod>
<Ford Taurus Cupholder Mod> <CC Tunk Light Mod> <Fut Short Throw Shifter>
<Custom CAI> <AEM Bypass Valve> <OBX Headers>
<Magnaflow High Flow Cat> <Dynomax Super Turbo Muffler>
<Drilled/Slotted Rotors> <Painted Calipers> <Axxis Metal Master Pads>

Ken

its really not worth fixing that, just part out the car and junk the chasis.

__________________
. k e n

PSA

Where in Pa are you? You also need to check the rear frame under the spare tire where the control arms are bolted in.

__________________
PSA

BlackWater68

i live near scranton.and thanks for the under the spare tire spot ill check that tomorrow probably.

BlackWater68

so this might be a long shot...but is there anybody around the scranton PA area that has a first generation legend coupe for sale?what im really looking for is just a solid chassis/frame to replace my rotting one.no engine or transmission required.thanks.