Instructions for the Iggee seat covers

wongtonsup · 03-21-07, 08:12 AM

Hi all. Just purchased a 1989 Acura Legend L and found this great site. The leather on this great car needs some work and I saw alot of comments on the Iggee seat covers found on Ebay.

They seem really nice and I've seen a few people with posts of the finished work (very nice Polarican90L). I also saw the progression pictures by Oyabun.

I was wondering if anyone had an electronic copy of the instructions actually provided by Iggee? I'm not going to pretend to be the handiest person out there, but I'd like to know what I'm up against - especially with the rear seats.

Thanks for your help.

Oyabun · 03-24-07, 04:52 PM

I havn't done the rear seat yet but I'm betting that it's easier than the front is. I'm not saying that the front is HARD, but it ain't duck soup!! For the front seats it's easier to remove the seats. Unplug the wires under the seat and remove from the vehicle. Then you can either place the seat cover over the seat and put the seat back in. Or you can remove the seat back cover and then put the cover on the seat and then put the rear cover back on the seat and put the seat back in!!! If you want to do it like I did. After you remove the seat from the car. Flip the seat upside down and on the seat bottom, by the outer edges of the seat back you will see 2 screws (Phillips). Remove these 2 screws and gently lift up and pull towards the bottom of the seat. (There are 2 clips at the upper part of the seat back that must be released when pulling on the seat back.) Note where these clips go into the seat because after you install the seat cover you will have to make 2 cuts in your NEW seatcovers before you put the seat back on. Then your DONE!!!! put the seat back in and enjoy your NEW IGGEE'S SEAT COVERS!!!!!!!!!!!!!!!!! Hope this makes sense!! Oh yea!! Ask Metro, I know he's done the rear seat!!http://www.imagestation.com/album/pi...?id=2098004625

BubzBeats · 03-26-07, 11:33 PM

the rear is simple if u can get the "back" part of the back seat out.

03-21-07, 08:12 AM	#1 (permalink)
wongtonsup Registered User Join Date: Mar 2007 Location: San Francisco, CA Posts: 1 Car 1: 1989 Acura Legend L iTrader: (0)	Instructions for the Iggee seat covers Hi all. Just purchased a 1989 Acura Legend L and found this great site. The leather on this great car needs some work and I saw alot of comments on the Iggee seat covers found on Ebay. They seem really nice and I've seen a few people with posts of the finished work (very nice Polarican90L). I also saw the progression pictures by Oyabun. I was wondering if anyone had an electronic copy of the instructions actually provided by Iggee? I'm not going to pretend to be the handiest person out there, but I'd like to know what I'm up against - especially with the rear seats. Thanks for your help.

03-24-07, 04:52 PM	#2 (permalink)
Oyabun "893" V.I.P. Join Date: Jul 2006 Location: Silicon Valley Posts: 388 Car 1: 1989 Acura Legend L Coupe Car 2: 1970 Buick GS Car 3: 1957 Chevy Truck iTrader: (0)	Instructions for Iggee seat covers I havn't done the rear seat yet but I'm betting that it's easier than the front is. I'm not saying that the front is HARD, but it ain't duck soup!! For the front seats it's easier to remove the seats. Unplug the wires under the seat and remove from the vehicle. Then you can either place the seat cover over the seat and put the seat back in. Or you can remove the seat back cover and then put the cover on the seat and then put the rear cover back on the seat and put the seat back in!!! If you want to do it like I did. After you remove the seat from the car. Flip the seat upside down and on the seat bottom, by the outer edges of the seat back you will see 2 screws (Phillips). Remove these 2 screws and gently lift up and pull towards the bottom of the seat. (There are 2 clips at the upper part of the seat back that must be released when pulling on the seat back.) Note where these clips go into the seat because after you install the seat cover you will have to make 2 cuts in your NEW seatcovers before you put the seat back on. Then your DONE!!!! put the seat back in and enjoy your NEW IGGEE'S SEAT COVERS!!!!!!!!!!!!!!!!! Hope this makes sense!! Oh yea!! Ask Metro, I know he's done the rear seat!!http://www.imagestation.com/album/pi...?id=2098004625 __________________ "893"--- U.S.Westcoast 49th Prefecture --- My Somewhat VIP Style Influenced Legend:http://www.cardomain.com/ride/2482474 Last edited by Oyabun : 03-24-07 at 05:04 PM. Reason: Typeos

03-26-07, 11:33 PM	#3 (permalink)
BubzBeats Metro Legends™ Join Date: Feb 2006 Location: DC Posts: 1,732 Car 1: 90L Colbolt Blue RIP Car 2: 90LS Melbourne Blue Car 3: Both are sedans^ iTrader: (0)	the rear is simple if u can get the "back" part of the back seat out. __________________ http://metrolegends.com/ G1 Love Baby!!RIP.. she was my 1st

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Iggee seat covers.	shizgriff	Second Generation Legend (1991-1995)	15	08-14-07 10:00 PM
Iggee Seat covers	dirty georgia boy	Second Generation Legend (1991-1995)	14	04-04-07 05:50 PM
iggee seat covers	legend_fan27	First Generation Legend (1986-1990)	33	09-04-06 08:18 AM
RE: Iggee seat covers info	TouringLegend95	Second Generation Legend (1991-1995)	12	03-01-06 02:05 AM
F/S Iggee Tan Seat Covers	TexasLegend92	Aftermarket Parts	7	01-24-06 11:33 PM

Remove Advertisements Sponsored Links
The Acura Legend & Acura RL Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)