need alignment tool

Raulporkuu · 05-14-08, 05:15 PM

i have a 89 legend ls 5 spd i need the clutch alignment tool i cant get one and with shipping they are like 15 bucks does anyone have an extra or one the want to sell cheap please let me know.

pacallen · 05-14-08, 06:42 PM

I just googled this but I assume this is what you're looking for? $10.49 shipped isn't too bad... 1987-1995 Acura Legend - Centerforce Clutch Alignment Tool

Never messed with the trans/clutch myself but someday when mine goes out I'll probably try tackling it!

Raulporkuu · 05-14-08, 10:37 PM

my car is exactly the same as yours its got 160,xxx miles i bought it off a friend he smoked the clutch and was gunna scrap it. with all the work i put into the car i figured id revive her. the job itself aint bad but i need the alignment to put it back together!!!!!
thanks

stephen · 05-15-08, 03:10 PM

Usually the alignment tool comes with the clutch parts. If you don't have it you can improvise by taking a wooden dowel and wrapping masking tape around it to match the diameters of the pilot bearing and input shaft.

doylerules4588 · 05-15-08, 03:32 PM

hey dude......i got a few laying around from previous tranny/engine swaps.......PM me and i can get it sent out to you once i find one of them

justin

05-14-08, 05:15 PM	#1 (permalink)
Raulporkuu Registered User Join Date: May 2008 Location: Michigan Posts: 7 Car 1: 89 Legend LS 5Spd Car 2: 00 gsxr 600 iTrader: (0)	need alignment tool i have a 89 legend ls 5 spd i need the clutch alignment tool i cant get one and with shipping they are like 15 bucks does anyone have an extra or one the want to sell cheap please let me know.

05-14-08, 06:42 PM	#2 (permalink)
pacallen ------------------------- Join Date: Oct 2003 Location: Chicago Posts: 1,736 Car 1: '89 LS Coupe (5 speed) iTrader: (1)	I just googled this but I assume this is what you're looking for? $10.49 shipped isn't too bad... 1987-1995 Acura Legend - Centerforce Clutch Alignment Tool Never messed with the trans/clutch myself but someday when mine goes out I'll probably try tackling it! __________________ SOLD: '87 Auto Sedan (12/31/2003)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Remove Advertisements Sponsored Links
The Acura Legend & Acura RL Forum Advertisement

05-14-08, 10:37 PM	#3 (permalink)
Raulporkuu Registered User Join Date: May 2008 Location: Michigan Posts: 7 Car 1: 89 Legend LS 5Spd Car 2: 00 gsxr 600 iTrader: (0)	my car is exactly the same as yours its got 160,xxx miles i bought it off a friend he smoked the clutch and was gunna scrap it. with all the work i put into the car i figured id revive her. the job itself aint bad but i need the alignment to put it back together!!!!! thanks

05-15-08, 03:10 PM	#4 (permalink)
stephen Registered User Join Date: Feb 2007 Location: Fremont, CA Posts: 330 Car 1: 1990 Acura Legend 2 Dr L Car 2: 1999 Mustang V6 iTrader: (0)	Usually the alignment tool comes with the clutch parts. If you don't have it you can improvise by taking a wooden dowel and wrapping masking tape around it to match the diameters of the pilot bearing and input shaft.

05-15-08, 03:32 PM	#5 (permalink)
doylerules4588 Registered User Join Date: Apr 2008 Location: Wadsworth, Ohio Posts: 28 Car 1: 88 Acura Legend Sedan iTrader: (0)	hey dude......i got a few laying around from previous tranny/engine swaps.......PM me and i can get it sent out to you once i find one of them justin

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)