3.5 Aluminum Crank Pulley Group Buy $173.50 shipped Priority

Telion · 01-04-08, 09:35 PM

-----Updated on 01/22/08-----

3.5 (C35a/RL) Aluminum Crank Pulley Group Buy is on.

LET'S DO THIS

payments via paypal can be sent to artisticasianimports@hotmail.com

-please be sure to select (or include)
-your real name,
-your address, your username, and
-what the payment is for in the memo box, and
-preferably a contact number where I can reach you
(I hate talking on the phone so don't worry about me calling you alot).

--If you need to send payment any other way please contact me via PM first.

--As for the closing date I think I will push it back one week, I am paying for the material in advance so this will not effect the timeframe.

Let's shoot for a Group Buy closing date of January 18th.

They wanna do this as a batch run

I need 10 people to make this happen (have 10 people performed this swap?)
Put the word out to RL owners if you get the chance!

Here's the specifics:

---Shorter Attention Span Section---

Specs: Designed to OEM 3.5 Pulley specs (less grooves in the center hole But it will have the keyway notch)

Price: $178.50 Shipped priority in the US (190.50 outside the US)
If you use paypal please pay $178.50 in the USA and 190.50 outside of the USA

Material: T6063 Aluminum

The process: CAD designed and precision CNC machined on one of these bad boys.

Mori Seiki NL2500SY

---Longer Attention Span Section---
The pullies will be CAD designed and CNC'd to the same specs and size of the OEM pulley but made out of T6063 aluminum. The difference will come in terms of weight and the center hole not being grooved to keep cost down. The only thing needed is the Key hole notch and for it to be perfectly balanced. There will not be any holes in it due to the needed weight factor as DV8 mentioned. However we did discuss the additional price of having holes machined into it for those that have to have them and it should not be more than an additional $10.00 The final difference in weight is unknown at this point, as I have just today put down the deposit to have the prototype fab'd. I will add a pic and weight as soon as I have the prototype made, he is going to try to get the prototype created asap. The CNC machine has a light work load right now so the faster we get going on this the faster I can get them in your hands. This a major commercial company and we have all seen small orders get bumped back for unknown reasons. ie our order vs winning an aerospace industry bid (which they also do) so let's make it happen!

The goal is 10 people, if we hit this I can ship these out @ $178.50 (in USA)
They will be shipped out priority mail to ensure everyone gets them in a timely manner. Now even though I am not so sure we will hit 10 people he did agree to drop the price $10.00 a piece if we hit an order of 20. Now I know someone will ask what if we don't get to 10. If this happens for whatever reason I will still try to get him to hold to that price as a production manager I think he can make it happen.

Telion · 01-04-08, 09:35 PM

This post reserved for keeping track of who is in______ Last updated 01-30-08______Total items paid 14

1. Telion---Paid
2. emaculate91ls---Paid
3. Whats77inaname---Paid
4. Jkurl---Paid
5. DV8---Paid
6. TeamLR---Paid
7. Overdrive---Paid
8. G1Goldcoupe---Paid
9. Jkurl---Paid
10. FallenAngel---Paid
11. Non forum member---Paid
12. datlegend327---Paid
13. Hinow---Paid
14. C32A5---Paid
15.

emaculate94GS · 01-04-08, 09:41 PM

In the process of having my 3.5 worked, a leight weight pully will be great. Count me in. I would like to see the proto type prior to sending payment however.

Telion · 01-04-08, 09:55 PM

As would I so I understand just hold on to the funds I wanna rock this out quick because I know what it is like to wait.

whats77inaname · 01-04-08, 10:10 PM

..in..

Telion · 01-04-08, 10:19 PM

Gotcha and PM'd you.

FallenAngel · 01-05-08, 05:04 AM

How much more would it be to have them make either just 1 or all with the center hole matching oem spec?

jkurl · 01-05-08, 05:36 PM

I want one add me to the list. lmk, when to pay.

Telion · 01-05-08, 09:50 PM

Quote:

Originally Posted by FallenAngel

How much more would it be to have them make either just 1 or all with the center hole matching oem spec?

I will find out for you though I don't think this will be an issue.

Telion · 01-07-08, 12:01 AM

Bumping to the top there has to be more interest in this

TeamLR · 01-07-08, 04:38 AM

put me down for one

Telion · 01-07-08, 04:54 AM

Gotcha

OverDrive · 01-07-08, 01:41 PM

Yep put me down for one!

Telion · 01-07-08, 02:12 PM

Got you added!

Telion · 01-08-08, 11:46 AM

Before I go to work bump

01-04-08, 09:35 PM	#1 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	3.5 Aluminum Crank Pulley Group Buy $178.50 shipped Priority -----Updated on 01/22/08----- 3.5 (C35a/RL) Aluminum Crank Pulley Group Buy is on. LET'S DO THIS payments via paypal can be sent to artisticasianimports@hotmail.com -please be sure to select (or include) -your real name, -your address, your username, and -what the payment is for in the memo box, and -preferably a contact number where I can reach you (I hate talking on the phone so don't worry about me calling you alot). --If you need to send payment any other way please contact me via PM first. --As for the closing date I think I will push it back one week, I am paying for the material in advance so this will not effect the timeframe. Let's shoot for a Group Buy closing date of January 18th. They wanna do this as a batch run I need 10 people to make this happen (have 10 people performed this swap?) Put the word out to RL owners if you get the chance! Here's the specifics: ---Shorter Attention Span Section--- Specs: Designed to OEM 3.5 Pulley specs (less grooves in the center hole But it will have the keyway notch) Price: $178.50 Shipped priority in the US (190.50 outside the US) If you use paypal please pay $178.50 in the USA and 190.50 outside of the USA Material: T6063 Aluminum The process: CAD designed and precision CNC machined on one of these bad boys. Mori Seiki NL2500SY ---Longer Attention Span Section--- The pullies will be CAD designed and CNC'd to the same specs and size of the OEM pulley but made out of T6063 aluminum. The difference will come in terms of weight and the center hole not being grooved to keep cost down. The only thing needed is the Key hole notch and for it to be perfectly balanced. There will not be any holes in it due to the needed weight factor as DV8 mentioned. However we did discuss the additional price of having holes machined into it for those that have to have them and it should not be more than an additional $10.00 The final difference in weight is unknown at this point, as I have just today put down the deposit to have the prototype fab'd. I will add a pic and weight as soon as I have the prototype made, he is going to try to get the prototype created asap. The CNC machine has a light work load right now so the faster we get going on this the faster I can get them in your hands. This a major commercial company and we have all seen small orders get bumped back for unknown reasons. ie our order vs winning an aerospace industry bid (which they also do) so let's make it happen! The goal is 10 people, if we hit this I can ship these out @ $178.50 (in USA) They will be shipped out priority mail to ensure everyone gets them in a timely manner. Now even though I am not so sure we will hit 10 people he did agree to drop the price $10.00 a piece if we hit an order of 20. Now I know someone will ask what if we don't get to 10. If this happens for whatever reason I will still try to get him to hold to that price as a production manager I think he can make it happen. __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come. Last edited by Telion : 01-23-08 at 12:14 AM.

01-04-08, 09:35 PM	#2 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	This post reserved for keeping track of who is in______ Last updated 01-30-08______Total items paid 14 1. Telion---Paid 2. emaculate91ls---Paid 3. Whats77inaname---Paid 4. Jkurl---Paid 5. DV8---Paid 6. TeamLR---Paid 7. Overdrive---Paid 8. G1Goldcoupe---Paid 9. Jkurl---Paid 10. FallenAngel---Paid 11. Non forum member---Paid 12. datlegend327---Paid 13. Hinow---Paid 14. C32A5---Paid 15. __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come. Last edited by Telion : 02-19-08 at 12:17 AM.

01-04-08, 09:41 PM	#3 (permalink)
emaculate94GS Soon to be BOOSTED! Join Date: Apr 2006 Location: Long Island Posts: 2,190 Car 1: SOLD:91' Acura Legend Sedan LS Car 2: 94' GS 6 Speed Car 3: 94 GS 6 Speed(CLONE) iTrader: (52)	In the process of having my 3.5 worked, a leight weight pully will be great. Count me in. I would like to see the proto type prior to sending payment however. __________________ SIG BY ALPEROVICH MODS---ALL OF THEM!!!!!!!! Check out my gallery! http://www.acura-legend.com/vbulleti...ebirth-126357/ The project... http://www.acura-legend.com/vbulleti...thread-120596/ Ksport Kontrol Group Buy!! $760 Shipped http://www.acura-legend.com/vbulleti...ed-123764-new/

01-04-08, 09:55 PM	#4 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	As would I so I understand just hold on to the funds I wanna rock this out quick because I know what it is like to wait. __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come.

01-04-08, 10:10 PM	#5 (permalink)
whats77inaname Renaissance. Join Date: Jul 2005 Location: Tx Posts: 3,650 Car 1: 91 5MT LS, 300k Car 2: 91 5MT LS, 183k Car 3: 03 G35 sdn (wife's) iTrader: (22)	..in.. __________________ "Game recognize game and you looking kinda unfamiliar right now"....

Remove Advertisements Sponsored Links
The Acura Legend & Acura RL Forum Advertisement

01-04-08, 10:19 PM	#6 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	Gotcha and PM'd you. __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come.

01-05-08, 05:04 AM	#7 (permalink)
FallenAngel Registered User Join Date: Jul 2004 Location: Ca Posts: 645 Car 1: 1992 LS Sedan - 3.5 iTrader: (1)	How much more would it be to have them make either just 1 or all with the center hole matching oem spec?

01-05-08, 05:36 PM	#8 (permalink)
jkurl Registered Libertarian Join Date: Apr 2002 Location: Los Angeles Posts: 1,174 Car 1: 95L sedan grn Car 2: 94LS 6spd cpe grn Car 3: 67econoline 63nova iTrader: (4)	I want one add me to the list. lmk, when to pay. __________________ 95L 3.5 A/T 4dr 171K • 94LS 2dr 6spd 181K project • Little Bro 93LS A/T 4dr

01-07-08, 12:01 AM	#10 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	Bumping to the top there has to be more interest in this __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come.

01-07-08, 04:38 AM	#11 (permalink)
TeamLR Acura-Legend OG Join Date: Mar 2007 Location: CT Posts: 917 Car 1: 92 Acura Legend LS Car 2: 97 BMW 528I Car 3: 99 Montero Sport iTrader: (6)	put me down for one __________________

01-07-08, 04:54 AM	#12 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	Gotcha __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come.

01-07-08, 01:41 PM	#13 (permalink)
OverDrive Keeper of Keys Join Date: Jun 2004 Location: Mill Valley, CA (NorthBay Area) Posts: 600 Car 1: 04 Mercedes C Class AMG Car 2: 99 Acura TL Car 3: 03 E320 Mercedes iTrader: (1)	Yep put me down for one! __________________ 1991 Acura Legend 3.5 OD Edition

01-07-08, 02:12 PM	#14 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	Got you added! __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come.

01-08-08, 11:46 AM	#15 (permalink)
Telion Of the Telion Chip Join Date: Feb 2006 Location: Hopefully In your ECU ;) Posts: 4,333 Car 1: White 91 KA8 5spd W/3.5, TII Cams & Manifold Car 2: White 91 KA8 JDM TII iTrader: (38)	Before I go to work bump __________________ \/Provider of The Telion Chip click here\/ http://telionsite.com or search Telion Chip 3.5, TII cams,pnp mani & springs,Telion Chip,HID's,H&R's/Koni's,Addco Sway bars,TII calipers,RH C2's,R.J. shifter,DV8 EGR plate,CAI,OBX headers,2.5" exhaust,hi-flow cat,K2 muffler,Stage III clutch,S&D rotors, KVR pads, blackend damper, a CF hood, AFC NEO, 3.5 Aluminum pulley, & Web cams. C&R Racing radiator and more to come.