Group Buy for an Extrude Honed Intake Manifold Service!!! $400

emaculate91ls · 05-08-08, 09:38 PM

Sorry for taking so long finally get this GB going, but as I am sure you know I have been spending every free minute I have organizing and working towards my overhaul.

A few months ago I had worked out a deal with the Extrude Hone facility in PA and discussed a few concerns I had towards the service because a member here by the name of Kenso had a similar service done about 3-4 years ago and was not 100% satisfied.
The Representative at the facility was very understanding and offered to make good on a not so positive experience (Thank you Kenso!), therefore I have been given the chance to offer the Acura Legend community an Extrude Hone service for the upper portion of the IM for just $400! The original price as advertised is between $700 and $800, roughly.

As you will soon see I have included some photos of my manifold after the job was complete. The powder coating job was done at a place called Boneheadperformance in PA, a shop just a few miles away. I highly recomend doing the service first then followed by some fresh powder!

I almost forgot to mention, for those of you doing a complete engine job like my self, I sent along my OEM gaskets to be matched with the intake ports. Once etched and matched I sent them over to my machinest who then matched up the ports on the heads them selves.

All we need is 4 participants to make this GB happen. Once we have 4 people I will send out payment instructions and so forth. The $400 does not include shipping or like I said powder coating. This price is for an Extrude Hone service on the intake manifold only.

Here is an interesteing thread related to the Extrude Hone process and benefits.
some good extrude hone info i came across...

llloydxmas · 05-09-08, 09:08 PM

I'm in if we can get this together soon. Can we get some powdercoating too for extra?

llloydxmas

emaculate91ls · 05-09-08, 10:06 PM

Quote:

Originally Posted by llloydxmas

I'm in if we can get this together soon. Can we get some powdercoating too for extra?

llloydxmas

Like I said, I had it done at another facility so I am sure you can do what ever it is you want to it.

Forevralegend · 05-10-08, 11:33 PM

looks really good!

05-08-08, 09:38 PM	#1 (permalink)
emaculate91ls Registered User Join Date: Apr 2006 Location: Long Island Posts: 1,801 Car 1: 91' Acura Legend Sedan LS Car 2: 94' Acura Lgend GS iTrader: (43)	Group Buy for an Extrude Honed Intake Manifold Service!!! $400 Sorry for taking so long finally get this GB going, but as I am sure you know I have been spending every free minute I have organizing and working towards my overhaul. A few months ago I had worked out a deal with the Extrude Hone facility in PA and discussed a few concerns I had towards the service because a member here by the name of Kenso had a similar service done about 3-4 years ago and was not 100% satisfied. The Representative at the facility was very understanding and offered to make good on a not so positive experience (Thank you Kenso!), therefore I have been given the chance to offer the Acura Legend community an Extrude Hone service for the upper portion of the IM for just $400! The original price as advertised is between $700 and $800, roughly. As you will soon see I have included some photos of my manifold after the job was complete. The powder coating job was done at a place called Boneheadperformance in PA, a shop just a few miles away. I highly recomend doing the service first then followed by some fresh powder! I almost forgot to mention, for those of you doing a complete engine job like my self, I sent along my OEM gaskets to be matched with the intake ports. Once etched and matched I sent them over to my machinest who then matched up the ports on the heads them selves. All we need is 4 participants to make this GB happen. Once we have 4 people I will send out payment instructions and so forth. The $400 does not include shipping or like I said powder coating. This price is for an Extrude Hone service on the intake manifold only. Here is an interesteing thread related to the Extrude Hone process and benefits. some good extrude hone info i came across... __________________ SIG BY ALPEROVICH TRI-STATE ACURA LEGEND MEET....5/18/08!!!! http://www.acura-legend.com/vbulleti...8-08-a-120580/

05-09-08, 09:08 PM	#2 (permalink)
llloydxmas Completly rebuilding... Join Date: Apr 2002 Location: Reno/Tahoe Posts: 225 Car 1: '94 LS 6-Spd Coupe iTrader: (1)	I'm in if we can get this together soon. Can we get some powdercoating too for extra? llloydxmas __________________ http://www.imagestation.com/picture/...d/fae2e002.jpg 1994 ACURA LEGEND LS COUPE 17" Konig Tantrums Momo Shift knob & E-brake InSaneAnime Grounding Kit "RED" Eibach Pro-Kit Koni REDS Rerverse Indiglo Gauges Valentine One w/conceal display Pioneer 8500MP deck Rockford-Phosgate speakers XM-system Moonroof Tilt-mod MLS strut bar

05-10-08, 11:33 PM	#4 (permalink)
Forevralegend Registered User Join Date: Jun 2006 Location: Sacramento Posts: 988 Car 1: 94 Legend gs type II iTrader: (11)	looks really good! __________________ mods- 2.5" mandrel exhaust, deleted cat, cold air intake, web cam regrinds, comp cam valve springs, port & polish heads and manifold, tb bypass, egr block, five speed clutch/flywheel, 80a polyurethane mounts all around, type 1 pulley, headers,re-fabed y-pipe, SR5guy Custom Chip, 6speed swap, Apexi safc II, strut bar, F/R sway bars, FL tie bars, tune 243.3 hp 197.7 ftlb N/A dynapack before manual swap 232.8 hp 204.0 ftlb N/A dynojet 10/19/07 13.737 1/4 mile @ 100.207 mph & 2.012 60' NA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
The Acura Legend & Acura RL Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)