XclusivLegend

o.k. i had a 2003 RSX-S and i hated the amber turn signal on the rear taillight, so @ the time there was a company offering transparent red vinyl that i took and placed over the amber taillight and tada... but anyway i was thinking about doing the same for the G2 Legend, now i did a search and i do realize someone on here did offer these @ 1 point in time pre-cut. i don't know if they will be pre-cut but all u have to do is lay it over the amber part of your taillight and cut it w/ a "SHARP" exacto blade or nife... these would run anywhere from $5-$10 shipped w/ in US & even Canada... is this something that would interest everyone b/c i am just waiting for a confirmation email from person i'm dealing w/... but if u guys are not interested then i'll just get some for myself... all payments would go either paypal, mailed money order or check. can i get a show of hands if u r interested or should i say a show of "LEGENDS"

before & after

 

Alperovich

if they are pre cut to fit our cars it would be excellent but i would get some for 5-10$ eitherway!! count me in 100%

__________________
~Alex

94 GS
MLS Bar; FUT rear ties; ADDCO rear sway bar; Blackend Engine Damper; EBC Yellow pads; D/S Rotors; Enkei EVO5's
Alpine HU+Speakers; 93 front bumper; Matte Black grill; Stromung axle-back 2.5 tips

ALoneR

id be in except i just bought my red stained glass spray paint and tracing paper yesterday so ill have all reds before the group buy gets off the ground =/

__________________

rufus

Count me in....

Mr_Chopsticks

Sounds like a nice deal to me Im down

__________________
http://img480.imageshack.us/img480/2848/rojansx1xs.jpg

• CAI W/ K&N filter
• 12" Kick Sub
• Hifonics Amp
• Polk all around

Fast cars, fast girls, fast money

Scbrindley

Sounds good, I'm in.

SB

__________________

CaptainTrap

im in (sedan)

__________________
1994 Legend GS Sedan
Black on Black
------------------------------
Want To Buy:
JDM KA7 Headlights (with HID retrofit if possible)
KA7 Mud Guards (set of 4 NEW)
Undercarrige Splash Guard
Legend Specific Remus
Center Wood Console
Top of Armrest
Original KA7 Floormates

mondonalds

I may be interested. Could someone post some pics of a before and after like on Xclusives RSX?

__________________

1999 3.2TL - Black w/ Type A (01-07 - ____)
1996 Toyota 4Runner Limited (05-06 - _____)
1993 LS Sedan - Geneva Green Pearl w/ Type F (11/04 - 07/06)

blkonblkcpe

Where do we pay????? I'm in!

MLC

Not me, I can't stand air pockets or wrinkles. It's almost impossible to get them on without wrinkles because of the curvature of the taillight

__________________
JDM KA8 Headlights~McCulloch 5300k HID~Fiberglass Eyelids by PJ~JDM KA8 Door Sills~K&N Intake w/OEM CAB~Lightweight Pullies~Bayou Stage II Chip~Stromung B Pipe~Magnaflow Cat~Remus Spec Exhaust~Koni Kontrols~CL-S Type/Ventus 215/50/17~SS Brake Lines~Brembo/Bradi Rotors~DC Tie Bar~KMS Strut Bar~Addco Rear Sway Bar~S2000 Antenna~Shaved Trunk~Optima Redtop

Gride_Cruiser

that is certainly the challange for coupes, i am, however, considering re-doing mine.

mrkeith

I was going to mention the same.
How can we apply it perfectly to the coupe tail light?
Is it possible to have hard plastic covers made?

__________________

The performance handling machine...

If you've got coil-overs, corner-balance them!
Please protect our environment: use a high-flow.

Shaar

yea my vinyl left a nice handful of air bubbles.. and wrinkles. i'm up for hard plastic covers.

__________________

XclusivLegend

for those who are skeptikal about air pockets... U WON'T GET ANY... if u follow directions... all u have to do is spray the taillight w/ soapy water, apply the transparent red vinyl to the taillight & get a blow dryer or heat gut to het up the vinyl & @ the same time use a credit card to smooth out any air pockets... the poin of the soapy water is to be able to make adjustments if necessary... it's like tinting your windows... if u have seen a professional tint your windows then u know what i mean... & most importantly, if u are skeptical about doing it, take your car to a tint shop... tell them that u want to tint your taillight & u have all the materials, they should only charge u $20.00 at most. that's what i did the first time i applied it to my taillights on the rsx & if u notice that the taillight of the rsx also curves off to the quarter panel... do u see any air pockets or bubbles? so to each its own but if u are scared of doing this... then u should be afraid of tinting your windows too!
Trust me when i tell u that this is one of the esiest things u'll ever do to your car & once it's done, u'll be happy... plus it will come w/ enough to do 4 taillights (or 2 pairs) so if u mess up the first try, u can learn from your mistake and try again...

blkonblkcpe

So when and where do I send the $$$$$ ????