FS: Heater Assembly

ari_one · 03-28-08, 08:33 PM

As noted have a heater assembly including evaporator and expansion valve for sale, $50 plus shipping (it is a bit heavy so shipping to your door will be around $40-45 depending on how far you are from Arizona). Please note that transistor not included.

mktng · 03-29-08, 02:23 AM

hmm since you are taking your car apart.... according to ur pic

.. uhh someone had mentioned to me about this valve? or a splitter or some little mechanism that allows heat to enter the cars cabin.. something that stops the cold air and lets the hot air in.. where do i locate that on my car? because im getting minimal heat atm. and its not the thermostat...

sorry, my explanation's suuuck

ari_one · 03-29-08, 02:44 AM

Hmm, not 100% sure I understand what you are referring to. On the engine side against the firewall is a valve that opens and closes. This valve lets hot coolant flow through the heater core creating heat in the heater assembly shown above. Within this assembly are different "flaps" or doors that are opened and closed to control the flow of air to push air through the heater core and/or evaporator (for cooling). There is a motor that controls the mix of hot and cold air, and another that controls other flaps to control the air to different places, ie feet, dash vents, or defroster vents. All the above except for the single valve in the engine compartment are all within the heater assembly above.

mktng · 03-29-08, 02:59 AM

yea that valve!. lol

the one u mentioned at the start.
is it possible for that thing to be stuck half open/closed not allowing the flow to .. flow properly causing my heat to be low?

and where exactly is that valve located??

ari_one · 03-29-08, 01:18 PM

Open your hood, stand on the passenger side, look at the firewall right behind the valve cover. There are two hoses about 3/4" that go into the firewall, follow the hoses towards the engine and one will have a small box in it, that is the valve. The box also has a wire going into it, that wire opens and closes the valve.

ari_one · 05-13-08, 01:48 PM

Bump

ari_one · 06-28-08, 03:14 PM

Sold the one pictured but I have a second one that I just pulled also from a 91L sedan and it looks just the same. So same price, etc.

ari_one · 07-08-08, 03:46 PM

Bump

Nashracing24 · 07-10-08, 11:25 AM

I'll take it if you still have it.

ari_one · 07-10-08, 12:51 PM

Available, PM sent.

ari_one · 07-18-08, 03:12 PM

Sold.

03-28-08, 08:33 PM	#1 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	FS: Heater Assembly As noted have a heater assembly including evaporator and expansion valve for sale, $50 plus shipping (it is a bit heavy so shipping to your door will be around $40-45 depending on how far you are from Arizona). Please note that transistor not included. __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/ Last edited by ari_one : 06-15-08 at 01:58 PM.

03-29-08, 02:44 AM	#3 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	Hmm, not 100% sure I understand what you are referring to. On the engine side against the firewall is a valve that opens and closes. This valve lets hot coolant flow through the heater core creating heat in the heater assembly shown above. Within this assembly are different "flaps" or doors that are opened and closed to control the flow of air to push air through the heater core and/or evaporator (for cooling). There is a motor that controls the mix of hot and cold air, and another that controls other flaps to control the air to different places, ie feet, dash vents, or defroster vents. All the above except for the single valve in the engine compartment are all within the heater assembly above. __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/

03-29-08, 01:18 PM	#5 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	Open your hood, stand on the passenger side, look at the firewall right behind the valve cover. There are two hoses about 3/4" that go into the firewall, follow the hoses towards the engine and one will have a small box in it, that is the valve. The box also has a wire going into it, that wire opens and closes the valve. __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/

05-13-08, 01:48 PM	#6 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	Bump __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/ Last edited by ari_one : 08-20-08 at 02:26 PM.

06-28-08, 03:14 PM	#7 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	Sold the one pictured but I have a second one that I just pulled also from a 91L sedan and it looks just the same. So same price, etc. __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/

Remove Advertisements Sponsored Links
The Acura Legend & Acura RL Forum Advertisement

03-29-08, 02:23 AM	#2 (permalink)
mktng Matthew is THE USER! Join Date: Nov 2007 Location: Ottawa, Ontario, Canada Posts: 1,633 Car 1: 91 KA7 Car 2: soon2b GIXXER 750!!! iTrader: (3)	hmm since you are taking your car apart.... according to ur pic .. uhh someone had mentioned to me about this valve? or a splitter or some little mechanism that allows heat to enter the cars cabin.. something that stops the cold air and lets the hot air in.. where do i locate that on my car? because im getting minimal heat atm. and its not the thermostat... sorry, my explanation's suuuck

03-29-08, 02:59 AM	#4 (permalink)
mktng Matthew is THE USER! Join Date: Nov 2007 Location: Ottawa, Ontario, Canada Posts: 1,633 Car 1: 91 KA7 Car 2: soon2b GIXXER 750!!! iTrader: (3)	yea that valve!. lol the one u mentioned at the start. is it possible for that thing to be stuck half open/closed not allowing the flow to .. flow properly causing my heat to be low? and where exactly is that valve located??

07-08-08, 03:46 PM	#8 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	Bump __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/

07-10-08, 11:25 AM	#9 (permalink)
Nashracing24 Registered User Join Date: Mar 2008 Location: Georgia Posts: 113 Car 1: 1991 Acura Legend Coupe iTrader: (1)	Is that second heater core still available?? I'll take it if you still have it.

07-10-08, 12:51 PM	#10 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	Available, PM sent. __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/

07-18-08, 03:12 PM	#11 (permalink)
ari_one Registered User Join Date: Oct 2005 Location: Phoenix Posts: 1,983 Car 1: 1991 Legend Car 2: 1991 Legend Car 3: 95 ZX-7 iTrader: (39)	Sold. __________________ Parting out my Red and White 91 L Sedans (mostly type 'F', some type 'E'): http://www.acura-legend.com/vbulleti...nix-az-122896/ or http://phoenix.craigslist.org/evl/pts/912725558.html Parts for sale: http://s265.photobucket.com/albums/i...albumview=grid Controls for sale: http://s265.photobucket.com/albums/i...%20For%20Sale/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: