Ground Control's

ATLimaging · 03-19-02, 11:00 PM

Here is a shot of my rear GC's w/ my Koni's
I ended up doing the install myself and have only gotten around to doing th rear...in which only took me 15minutes per side because I ddin't need a spring compressor 'cause my Susp. Teck springs were cut. Very easy

The ride is very nice...I plan to do the fronts this Sunday

I put my stocks on so I can go a week or so until I finish the front w/ out an alignment...

The Koni's are NOT orage, actually RED...the flash just made them appear this way

03-20-02, 02:10 AM

Damn Slammin em' like WWF... That's looooow..

Would like to see how they look w/ the 18's please..

Eye Candy · 03-20-02, 04:31 AM

I had my coupe like that for 2 days when I first installed my GC's and Koni's. However, after the second day I almost ripped off my front bumper over a bump I decided to raise it back up. My 18's have a bad offset so I can't do it with them. hope you can.

LeGenDz · 03-20-02, 04:56 AM

Slam the front and the back and take a pic! I wanna see.

ATLimaging · 03-20-02, 07:36 AM

HAHA...I don't plan to keep it that low

I'm actually planning to raise it up alittle more than it was before w/ my Susp. Tech springs & 18's so that I will not wear my tires out as quick as I had been...

Eye Candy · 03-20-02, 12:41 PM

Hey, GREAT job on the shaved moldings
LOOKS SWEET!

now I want to mine

HATE_ME_NOW · 03-21-02, 02:47 AM

Yeah i've been meaning to ask how come u didn't do the door handles?

**502 MotorSports** · 03-22-02, 07:38 PM

have you decided on a paint scheme yet?

ATLimaging · 03-23-02, 01:44 AM

I didn't do the handles because it ended up seeming to unpractical to me in the long run-- I just ended up shaviong off the ugly locks on both doors.
I'm still deciding on my final paint, but it will be a dark blue for sure. It is getting painted on early April

03-23-02, 04:58 AM

That should be sweet, I can't wait to see the final product.

Triton3K · 03-24-02, 03:10 PM

good work you got there. Tell us how the car handles and rides when you put all four GC's on.

ATLimaging · 03-24-02, 10:48 PM

I finished the fronts up today with the help of Cody(thank you so much!!!) and my friend Wendall...it took about 1.5 hours to finish up the front. The handling is great-- and I still have my stocks on. I actually have the car riding higher than it was previously...but it still looks clean and my chamber isn't too bad. I'm going to put my 18's on tomorrow...do a few more minor adjustments and then get it aligned.
I highly recoemmend the GC/Koni set-up...it rides really, really, really great!

03-25-02, 12:33 AM

Hey ATLimaging... Can you help me put my H&R and Koni's on my Coupe... When I get home in may... He He..

ATLimaging · 03-25-02, 11:30 AM

Sure man-- ask Cody too he got skills

92coupeon18s · 03-26-02, 01:02 PM

i will help man. We just need power tools or im not doing it. just tell me where and when

03-19-02, 11:00 PM	#1 (permalink)
ATLimaging www.full-efx.com Join Date: Feb 2002 Location: Alpharetta, Ga Posts: 157 Car 1: 91 4door Legend iTrader: (0)	Ground Control's Here is a shot of my rear GC's w/ my Koni's I ended up doing the install myself and have only gotten around to doing th rear...in which only took me 15minutes per side because I ddin't need a spring compressor 'cause my Susp. Teck springs were cut. Very easy The ride is very nice...I plan to do the fronts this Sunday I put my stocks on so I can go a week or so until I finish the front w/ out an alignment... The Koni's are NOT orage, actually RED...the flash just made them appear this way __________________ '91 4dr Legend Ground Control / Koni Suspension 18" Enkie's / Pirelli 215.40 P7000SS Shaved door mouldings, locks, hood mouldings, frenched antenna, custom kit with molded sideskirts and rear bumper, M3 custom mirrors A T L A N T A, G E O R G I A

03-20-02, 07:36 AM	#5 (permalink)
ATLimaging www.full-efx.com Join Date: Feb 2002 Location: Alpharetta, Ga Posts: 157 Car 1: 91 4door Legend iTrader: (0)	HAHA...I don't plan to keep it that low I'm actually planning to raise it up alittle more than it was before w/ my Susp. Tech springs & 18's so that I will not wear my tires out as quick as I had been... __________________ '91 4dr Legend Ground Control / Koni Suspension 18" Enkie's / Pirelli 215.40 P7000SS Shaved door mouldings, locks, hood mouldings, frenched antenna, custom kit with molded sideskirts and rear bumper, M3 custom mirrors A T L A N T A, G E O R G I A

03-22-02, 07:38 PM	#8 (permalink)
502 MotorSports 502MotorSports.com Join Date: Jan 2002 Location: ATLVILLE Posts: 9,445 Car 1: e39 540i Car 2: e46 325xi \| e46 330i Car 3: S430 iTrader: (0)	Doug have you decided on a paint scheme yet? __________________ The Hotness! Elevate Your Standards.... Legend Mod Money! Jasmyn \| Final e39 Pics \| 502MotorSports MySpace

03-23-02, 01:44 AM	#9 (permalink)
ATLimaging www.full-efx.com Join Date: Feb 2002 Location: Alpharetta, Ga Posts: 157 Car 1: 91 4door Legend iTrader: (0)	I didn't do the handles because it ended up seeming to unpractical to me in the long run-- I just ended up shaviong off the ugly locks on both doors. I'm still deciding on my final paint, but it will be a dark blue for sure. It is getting painted on early April __________________ '91 4dr Legend Ground Control / Koni Suspension 18" Enkie's / Pirelli 215.40 P7000SS Shaved door mouldings, locks, hood mouldings, frenched antenna, custom kit with molded sideskirts and rear bumper, M3 custom mirrors A T L A N T A, G E O R G I A

03-24-02, 10:48 PM	#12 (permalink)
ATLimaging www.full-efx.com Join Date: Feb 2002 Location: Alpharetta, Ga Posts: 157 Car 1: 91 4door Legend iTrader: (0)	All done! I finished the fronts up today with the help of Cody(thank you so much!!!) and my friend Wendall...it took about 1.5 hours to finish up the front. The handling is great-- and I still have my stocks on. I actually have the car riding higher than it was previously...but it still looks clean and my chamber isn't too bad. I'm going to put my 18's on tomorrow...do a few more minor adjustments and then get it aligned. I highly recoemmend the GC/Koni set-up...it rides really, really, really great! __________________ '91 4dr Legend Ground Control / Koni Suspension 18" Enkie's / Pirelli 215.40 P7000SS Shaved door mouldings, locks, hood mouldings, frenched antenna, custom kit with molded sideskirts and rear bumper, M3 custom mirrors A T L A N T A, G E O R G I A

Remove Advertisements Sponsored Links
The Acura Legend & Acura RL Forum Advertisement

03-20-02, 02:10 AM	#2 (permalink)
Posts: n/a	Damn Slammin em' like WWF... That's looooow.. Would like to see how they look w/ the 18's please..

03-20-02, 04:31 AM	#3 (permalink)
Eye Candy aka EYE SORE Join Date: Jan 2002 Location: Toronto, Canada Posts: 327 Car 1: 1992 Forest Green Coupe Car 2: 2005 300 Chrysler Car 3: 2001 Dodge Durango iTrader: (0)	I had my coupe like that for 2 days when I first installed my GC's and Koni's. However, after the second day I almost ripped off my front bumper over a bump I decided to raise it back up. My 18's have a bad offset so I can't do it with them. hope you can.

03-20-02, 04:56 AM	#4 (permalink)
LeGenDz Banned Join Date: Jan 2002 Location: Oklahoma Posts: 726 Car 1: Acura Legend GS Sedan iTrader: (0)	Slam the front and the back and take a pic! I wanna see.

03-20-02, 12:41 PM	#6 (permalink)
Eye Candy aka EYE SORE Join Date: Jan 2002 Location: Toronto, Canada Posts: 327 Car 1: 1992 Forest Green Coupe Car 2: 2005 300 Chrysler Car 3: 2001 Dodge Durango iTrader: (0)	Hey, GREAT job on the shaved moldings LOOKS SWEET! now I want to mine

03-21-02, 02:47 AM	#7 (permalink)
HATE_ME_NOW WANNA PLAY? OK WE PLAY Join Date: Jan 2002 Location: ? Posts: 1,662 Car 1: ? iTrader: (0)	Yeah i've been meaning to ask how come u didn't do the door handles?

03-23-02, 04:58 AM	#10 (permalink)
Posts: n/a	That should be sweet, I can't wait to see the final product.

03-24-02, 03:10 PM	#11 (permalink)
Triton3K I'm too sexy for my car Join Date: Jan 2002 Location: Bronx, NYC Posts: 2,517 Car 1: 1993 LS Sedan iTrader: (0)	good work you got there. Tell us how the car handles and rides when you put all four GC's on.

03-25-02, 12:33 AM	#13 (permalink)
Posts: n/a	Hey ATLimaging... Can you help me put my H&R and Koni's on my Coupe... When I get home in may... He He..

03-25-02, 11:30 AM	#14 (permalink)
ATLimaging www.full-efx.com Join Date: Feb 2002 Location: Alpharetta, Ga Posts: 157 Car 1: 91 4door Legend iTrader: (0)	Sure man-- ask Cody too he got skills __________________ '91 4dr Legend Ground Control / Koni Suspension 18" Enkie's / Pirelli 215.40 P7000SS Shaved door mouldings, locks, hood mouldings, frenched antenna, custom kit with molded sideskirts and rear bumper, M3 custom mirrors A T L A N T A, G E O R G I A

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-26-02, 01:02 PM	#15 (permalink)
92coupeon18s Registered User Join Date: Jan 2002 Location: ATL Posts: 3,116 Car 1: 12sec E36 M3 iTrader: (0)	i will help man. We just need power tools or im not doing it. just tell me where and when