Acura Legend Forum banner
1 - 20 of 224 Posts

Smokinfastlegend

· Rebuilding :(
Joined
·
4,727 Posts
Discussion starter · #1 · (Edited)
Image


Well its 2008 and I have a feeling there are a few new members who are interested in some 94-95 fog light look a likes. With the 94-95 foglights costing an arm and a leg, along with being very rare, these are a very reasonable substitute. Price has not been determined yet as we need to know if there is alot of interest before we do this!
We are hoping for more then 5 this time so if we can tell them we have a good amount wanting some now, then we most likely will get a better price.

The last group buy i think the highest amount was $121 with shipping. But I can not guarantee this price as shipping costs have risen along with the price of these lights (from the original place we were doing the gb through.) But all hope is not lost, as i might have a way to get them at a cheaper price, but again, no guarantee on that either.

On our 95 5spd
Image


Image


After the wreck we got another legend, and put them on that.

Image


Austinlegend's 91-93 installation.
Image


Bl420's Install
Image


Image


Alperovich's 94-95 Coupe Installation
As you can see the mounts need a little work, (extensions) because the bumper has a recess in the spot where these lights would mount.
Image


Image

They can be mounted on a coupe but they need a little more work. (Ill have alperovich post up his pictures.)

So post up if you are interested.
 
Discussion starter · #7 ·
Updated: check first post.

Added:
*Pictures of 94-95 coupe installation
*Pictures of 91-93 Bumper Installations (2 types of installation)
*Possible minimum order amount
 
Discussion starter · #14 ·
Pretty easy, but please, limit questions to PM and saying "interested" to the thread, it will help keep things more organized.
 
I'm in for a GB, lets get this rolling ASAP while I still have money.. LOL
 
so for the modded part that something extra i need to buy? or it comes with the kit
yes, with what comes in the kit. you wont be able to install them like i installed mine,

However the install is VERY easy. It required removal of the bumper from the bumper support (a few times for me trying to figure it out). Drilling a hole, and useing some cheap asseories from the hardware store (yup, i walked around the hardware store for like an hr trying to figure out what i can use).

Wiring is another story. this can be done in a few ways depending how you want it installed.

I have more detailed pictures of my install, which is the end is VERY simple. I'll post more details when i get a chance, infact, i'll probably have to start a thread about it.

Get the hella's.
 
1 - 20 of 224 Posts