Acura Legend Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,795 Posts
Discussion Starter · #1 ·
Ok, I know how to aim my headlights vertically(up and down) with a Philips Head Screwdriver...But I am having trouble aiming them side to side...If a philips head is required for the side the side aiming also, I cannot find where...HELP!! Thanks.
 
G

·
I don't think you can! Unless you tighten and untighten some bolts the hold the headlight together, but that would be stupid!
 

·
GS Hog
Joined
·
7,026 Posts
The horizontal adjustment is also done by the same method using a philips head screwdriver. Look to the far edge of the rear of the headlight housing closest to the fender. It's there.
 
1 - 3 of 3 Posts
Top