Acura Legend Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
368 Posts
Discussion Starter · #1 ·
When in park the car idles in between .50 and .45
then in drive it will not go below 1rpm so when im at a stop i really gotta hold the brake cause she wants to run off :) just curious because i at first thought just adjust the idle screw but the parking idle is fine so now im leaning towards the computer? any ideas or guesses might help THANK YOU ALL AGAIN AND HAVE A GREAT WEEKEND !
 

·
Registered
Joined
·
368 Posts
Discussion Starter · #3 ·
hmmm so i guess just spray carb cleaner over it till it chokes? but its not like its flucuataing and if it was a vaccum leak wouldnt it do no matter what gear i was in? Thanks for the thought though man
 

·
Registered
Joined
·
1,210 Posts
the idle air control valve needs to be unplugged to adjust the idle screw. It could be your idle air control valve possibly not. I swapped mine because of similar trouble but mine ended up being caused by a bad vehicle speed sensor. A vacume problem is a possible cause. good luck
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top