Acura Legend Forum banner
1 - 2 of 11 Posts

· Registered
1,306 Posts
Ok here is an exhaust rundown. Your exhaust manifolds & y-pipe looks like the picture below. The manifolds bolt to the head and have 3 holes/ea for each combustion chamber. The manifolds then connect to the y-pipe. Not pictured would be the catalytic converter which connects to the other end of the y-pipe, which looks to have 3 bolts on the front flange.
P.S. This is a Type I set-up, the Type II is slightly different.
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.