Acura Legend Forum banner
1 - 2 of 23 Posts

· Premium Member
9,642 Posts
OK, this sounds like something I had a problem with after my repaint. I had the engine totally disconnected from anything around the firewall.

There are 4 large connector plugs (I think they're all gray or tan) near the ABS reservior. 2 of those plugs are interchangable and when you accidently swap them, you'll get a no start. Find those 2 plugs and swap them. See if that helps. It won't hurt anything to swap them, since I accidently had them swapped at one point.

If that doesn't work, I'm going to go with either a harness problem, or a bad ECU. Let me know.
1 - 2 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.