Like I said in our emails last summer I can use a few sets 1 coupe and 3 sedans. I email youbthe otherday. Keep me posted as I need these asap

 

i'm in for a set of clear and red for a sedan!

 

Holy smokes, those red/clear lenses look amazing. The all-clear, not so much. I would be curious how these hold up to weather and heat (from the lightbulbs).

 

I have not had a chance to fully test these out but I can assure you that they are not crap. I've compared these to the factory lenses and they are about the same in thickness. They are hard and seems pretty sturdy. The factory lenses can withstand oven temperatures up to 200 degrees so I'm guessing these should be able to come pretty close. Your light bulbs are recessed pretty far back in the housing so don't worry about them melting the lenses. Plus I don't think the light bulbs can reach near 200 degrees in heat right?

 

Super tempted. How many of the red bottom/ all clear tops do you have for the coupe?

 

i will be interested in the red and clear where do i sign up for a set for my 2dr

 

Interested in the red/clear tailight for legend coupe. Is there anymore available for sale?

 

I'm definitely interested in the red clear red for my sedan

 

I'll take a all clear set

 

Hell Yes!

I want a pair of the red/clear for my sedan. If you are able to get them made for the sedan i will definetly take a pair!

I always wanted these for my legend but didn't think it was possible to get

 

If there is anyway I could get all clear, I will buy a pair asap.

 

Actually as a matter of fact I do have one set of All Clear Prototypes left. Original buyer backed out after 3 weeks of waiting for payment. LMK if you're interested.

 

Red Bottom, Clear top.
In.

 

Here's an Update:

GOOD NEWS. I've finally heard back from my contact guy overseas. He received the tail light donors in good shape. Also he's finally located a shop that's willing to do Injection Molds. Quality will be close to factory or if not better. Now, only problem is, pricing is going to be a little bit higher just as I anticipated for Injection Molding. $250 for a set of sedans and coupes. Coupes will be red bottom, clear top (by popular demand). Sedans will be red/clear/red. For those who want all clears, I'm still trying to negotiate for that small number to be manufactured. These guys want a large enough order for them to even start the developing process. For that, I'll be placing an order of 200. 100 for sedan, and 100 for coupes. Like I mentioned before, this is not a traditional group buy. (I can't imagine how long it'll take to get all 200 payments in). If we decided to go with the injection mold process, then production time should take about 3 months.

Second option we have is going with the hand made process (like the prototypes in shown in the first post). With this process we can have more of a made-to-order fashion. Those who want all clears will get all clears. Those who want red borders on the coupes shall have theirs and so forth. Pricing for those will be $200 shipped. Only problem is .. quality is questionable. Fitment is also another concern (I would say about 95-99% good fitment). And then cracking and fading concerns. (Not to diss the prototypes in any way). I still have confidence this those. Those who already purchased the Prototypes feel free to chime in.

Also keep in mind that hand made ones can start producing it as soon as they get the GO. However, It's not going to be a 100% faster than Injection molding. It would take about 1 pair to make per day. So... 30 days = 30 pairs. So you're looking at at least a month before you can get your hands on a set. They won't ship them out til they have like at least 30- or 40 sets completed (cut the cost of shipping). The ones who ordered last will have to wait til the next batch is finished.

I know I can't start another Poll on this thread, but give me your inputs on what you'd like to see happen. Unfortunately, we can't go with both options so post your votes.

 

well this is good and bad news.

 

Very true. Depending on how you look at it.

 

ok i still want the all clears

 

Try helping with smaller font next time

 

Sedan Red/Clear/Red Example:

Here's a list of people that have voted or shown some interest in this group buy. If your name is not on the list, then please let me know. If you are ON the list and would like to be removed, please let me know as well. No hard feelings here. If you are on the list and have a question mark (?) next to your name, that means I wasn't sure if you're 100% in or not. Please confirm. If you're on the Sedan or Coupe ?? :dunno: list, Please confirm if you have a Sedan or Coupe since I can't tell which vehicle you have.

COUPE Red/Clear Injection Mold
(1) Joe E
(2) Joe E
(3)SuperLegend91
(4)Poochmike
(5)legendrhythm
(6)StimulusPackage
(7)brunzie
(8)LegendCanada
(9)midtownman
(10)holyabish1
(11)Legendka8
(12)Daddykay24
(13)6spd_legend
(14)rrogers
(15)Dreams94coupe
(16)Alperovich
(17)MemberLS02
(18)Bocsta
(19)Socol
(20)ΩSickSON71Ω ?
(21)xpressive
(22)M-Tuning
(23)Nino418
(24)Tim93LS
(25)terragotti
(26)L3GDKANG/JDMKANG
(27)Telion
(28)soloist
(29)Type-M
(30)brothermatt
(31)legendg27
(32)pjslegend
(33)Rome1991
(34)Mickeytl
(35)LeStyles92 (All Clear) ?
(36)jose3030
(37)acura-legend
(38)rizzimo
(39)EarlThePearl
(40)Coupedesix
(41)Coupedesix
(42)sherwoodlegend ?
(43)Sboothsr
(44)Bill Williams (non forum member)
(45)n8s94ls
(46)Homeboyx
(47)Damaged (All Clear?)
(48)G2BMC (All Clear)
(49)MrMxyzptlk
(50)MrMxyzptlk
(51)LeGeNdF^n

Sedan or Coupe?? :dunno:. Please confirm.
LARacer2000

SEDAN Red/Clear/Red Injection Mold
(1)Wes
(2)ACKY91
(3)-X-
(4)Roger
(5)Daddykay24
(6)mightimouse (All Clear)?
(7)LegendLand
(8)robertstrendell (All Clear)?
(9)GrtOutdoorsAZ ?
(10)94LegendaryAcuraGS
(11)(=^.^=) ?
(12)Biggg72 (All Clear)?
(13)legend8800
(14)Jonslegend (All Clear) ?
(15)L3GDKANG/JDMKANG
(16)L3GDKANG/JDMKANG
(17)emaculate94GS
(18)samblaze ?
(19)UNCLEgend
(20)Chrispy
(21)VICTORIOUSVIC
(22)pearlka7typeII
(23)pushinaLEGEND
(24)DaBrizat
(25)Legend37
(26)acura_boi95
(27)boostxrabbit87
(28)Mendozajuan
(29)lro153

 

looks good, how does installation work?

 

You will have to remove your factory lenses and replace them with these. There are 2 methods that you can use. Either the oven method or a heat gun would do the trick. I can send you a brief DIY if you need one. I'm also offering an installation service for a fee of $50 shipped. All you have to do is ship your tail lights to me and they'll come back to you ready to install back on your car.

 

i'm not that advanced and don't know how to add my name to your list but, i want a set of clear/red (coupe). when does this happen?

 

NP! All you have to do is post a response and I'll add you to the list. These will be available in about less than 3 months.

Ok, one set of clear/red for a coupe.

 

Ok, a little update.

After careful consideration, my business partner decided that it might be wise to only create 1 mold first to really test out the quality of these lenses. After all, all we heard from the company was "yea, sure we can make these tail lights." We wanted to be 100% sure that they CAN deliver and that the quality is no less than exceptional. Rather than nosediving first and dumping loads of cash into making 4 molds at one time, we're only going to make 1 first. Since the coupes show a more promising demand, elected to produce the Coupe tail light (driver or passenger side) first. We'll run a sample of 10 production lenses first. After having them shipped over here and I inspect and test fit each and every one, then we can give it a GO for the rest.

I'm sorry for this little delay, but I think it is out of the best interest for us right now. Money is really hard to come by and we must spend it wisely. Hopefully this should only take about another month or so to do.

 

I would be in for a set of the lights for the sedan when they becomoe available. How do I get on the list and such? Thanks.

 

Added. :thumbsup:

I'd be in for a pair of clears for a coupe if you could get them. One question, if I send you my lights can you black the chrome out when installing the new lenses?

Would that be red/clear or All Clear? Sure I can black out the chrome. How much do you want to black out? All or just some with some areas remaining chrome like blacked out headlights?

 

I'd be in for a pair of clears for a coupe if you could get them. One question, if I send you my lights can you black the chrome out when installing the new lenses?

 

If you blacked out everything, then even though you have red or yellow lights, It won't be that effective when on. More than likely, you will only see red or yellow dots from afar. This could be hazardous. Also, what are you going to do about red reflectors? You need red reflectors either on the tail lights or on the body of the car. Otherwise, the tail lights would be super illegal.

It's not my business to tell you what to do but I'm just concerned that after you get the tail lights and they're not compliant and then you're not happy in the end.

 

Good points! I guess I'll have to experiment a bit and see which is more effective, a slight tint on a normal lense or a complete black out of the chrome with a clear lense. I was thinking of putting in LED style lights so that would help with illumination issues (I hope).

 

Put me down for red/clear/red sedans.

I'm not quite sure how to install them so is it possible for a DIY too?

 

Put me down for red/clear/red sedans.

I'm not quite sure how to install them so is it possible for a DIY too?

No Problem. I'll Post a DIY once this thing gets developed.

 

No offense but I think your over charging simply because no one else offers these. It's all part of free trade but just thought I'd offer my $.10 And from what I can gather on this board so far group buys go like this... Lots and lots of interests and demands but when it comes time to pay up, the person fronting the $$ gets the shaft. Other than that good luck with the sales. They look really nice.