Acura Legend Forum banner

Which Custom Tail Light Would You Be Interested In?

  • Coupes - Red Bottom, Clear Top

    Votes: 29 29%
  • Coupes - Red Bottom, Clear Top w/Red Surround

    Votes: 20 20%
  • Coupes - All Clear

    Votes: 7 6.9%
  • Sedans - All Red w/Clear Center (RCR)

    Votes: 44 44%
  • Sedans - All Clear

    Votes: 19 19%
21 - 40 of 174 Posts
Yea but it's like yelling so I'm gonna need you to resize these to normal size.
are you serious?? IF I DID IT IN ALL CAPS, THATS YELLING, and you should be able to tell by the context of the message that no-one is yelling at anybody. Besides all of that its just words, you shouldn't take it so personally; but if you want to be that specific then i guess, its all good man.
 
are you serious?? IF I DID IT IN ALL CAPS, THATS YELLING, and you should be able to tell by the context of the message that no-one is yelling at anybody. Besides all of that its just words, you shouldn't take it so personally; but if you want to be that specific then i guess, its all good man.
Like I said it's considered yelling and rude. The point is that it's rude. Now that's the end of it. Sorry if you don't like it.
 
Discussion starter · #23 · (Edited)
Sedan Red/Clear/Red Example:
Image


Here's a list of people that have voted or shown some interest in this group buy. If your name is not on the list, then please let me know. If you are ON the list and would like to be removed, please let me know as well. No hard feelings here. If you are on the list and have a question mark (?) next to your name, that means I wasn't sure if you're 100% in or not. Please confirm. If you're on the Sedan or Coupe ?? :dunno: list, Please confirm if you have a Sedan or Coupe since I can't tell which vehicle you have.

COUPE Red/Clear Injection Mold
(1) Joe E
(2) Joe E
(3)SuperLegend91
(4)Poochmike
(5)legendrhythm
(6)StimulusPackage
(7)brunzie
(8)LegendCanada
(9)midtownman
(10)holyabish1
(11)Legendka8
(12)Daddykay24
(13)6spd_legend
(14)rrogers
(15)Dreams94coupe
(16)Alperovich
(17)MemberLS02
(18)Bocsta
(19)Socol
(20)ΩSickSON71Ω ?
(21)xpressive
(22)M-Tuning
(23)Nino418
(24)Tim93LS
(25)terragotti
(26)L3GDKANG/JDMKANG
(27)Telion
(28)soloist
(29)Type-M
(30)brothermatt
(31)legendg27
(32)pjslegend
(33)Rome1991
(34)Mickeytl
(35)LeStyles92 (All Clear) ?
(36)jose3030
(37)acura-legend
(38)rizzimo
(39)EarlThePearl
(40)Coupedesix
(41)Coupedesix
(42)sherwoodlegend ?
(43)Sboothsr
(44)Bill Williams (non forum member)
(45)n8s94ls
(46)Homeboyx
(47)Damaged (All Clear?)
(48)G2BMC (All Clear)
(49)MrMxyzptlk
(50)MrMxyzptlk
(51)LeGeNdF^n

Sedan or Coupe?? :dunno:. Please confirm.
LARacer2000

SEDAN Red/Clear/Red Injection Mold
(1)Wes
(2)ACKY91
(3)-X-
(4)Roger
(5)Daddykay24
(6)mightimouse (All Clear)?
(7)LegendLand
(8)robertstrendell (All Clear)?
(9)GrtOutdoorsAZ ?
(10)94LegendaryAcuraGS
(11)(=^.^=) ?
(12)Biggg72 (All Clear)?
(13)legend8800
(14)Jonslegend (All Clear) ?
(15)L3GDKANG/JDMKANG
(16)L3GDKANG/JDMKANG
(17)emaculate94GS
(18)samblaze ?
(19)UNCLEgend
(20)Chrispy
(21)VICTORIOUSVIC
(22)pearlka7typeII
(23)pushinaLEGEND
(24)DaBrizat
(25)Legend37
(26)acura_boi95
(27)boostxrabbit87
(28)Mendozajuan
(29)lro153
 
Discussion starter · #25 ·
looks good, how does installation work?
You will have to remove your factory lenses and replace them with these. There are 2 methods that you can use. Either the oven method or a heat gun would do the trick. I can send you a brief DIY if you need one. I'm also offering an installation service for a fee of $50 shipped. All you have to do is ship your tail lights to me and they'll come back to you ready to install back on your car.
 
i'm not that advanced and don't know how to add my name to your list but, i want a set of clear/red (coupe). when does this happen?
 
Discussion starter · #27 ·
i'm not that advanced and don't know how to add my name to your list but, i want a set of clear/red (coupe). when does this happen?
NP! All you have to do is post a response and I'll add you to the list. These will be available in about less than 3 months.

Ok, one set of clear/red for a coupe.
 
Discussion starter · #28 ·
Ok, a little update.

After careful consideration, my business partner decided that it might be wise to only create 1 mold first to really test out the quality of these lenses. After all, all we heard from the company was "yea, sure we can make these tail lights." We wanted to be 100% sure that they CAN deliver and that the quality is no less than exceptional. Rather than nosediving first and dumping loads of cash into making 4 molds at one time, we're only going to make 1 first. Since the coupes show a more promising demand, elected to produce the Coupe tail light (driver or passenger side) first. We'll run a sample of 10 production lenses first. After having them shipped over here and I inspect and test fit each and every one, then we can give it a GO for the rest.

I'm sorry for this little delay, but I think it is out of the best interest for us right now. Money is really hard to come by and we must spend it wisely. Hopefully this should only take about another month or so to do.
 
I'd be in for a pair of clears for a coupe if you could get them. One question, if I send you my lights can you black the chrome out when installing the new lenses?
 
Discussion starter · #31 ·
I would be in for a set of the lights for the sedan when they becomoe available. How do I get on the list and such? Thanks.
Added. :thumbsup:

I'd be in for a pair of clears for a coupe if you could get them. One question, if I send you my lights can you black the chrome out when installing the new lenses?
Would that be red/clear or All Clear? Sure I can black out the chrome. How much do you want to black out? All or just some with some areas remaining chrome like blacked out headlights?
 
Would that be red/clear or All Clear? Sure I can black out the chrome. How much do you want to black out? All or just some with some areas remaining chrome like blacked out headlights?
All Clear, the entire tail light assembly blacked out. I'm having the car repainted all black with all the chrome blacked out and all insignia removed. So if the entire light assembly is black with a clear cover, I can throw in some Red and Yellow lights and still be legal.
 
Discussion starter · #33 ·
If you blacked out everything, then even though you have red or yellow lights, It won't be that effective when on. More than likely, you will only see red or yellow dots from afar. This could be hazardous. Also, what are you going to do about red reflectors? You need red reflectors either on the tail lights or on the body of the car. Otherwise, the tail lights would be super illegal.

It's not my business to tell you what to do but I'm just concerned that after you get the tail lights and they're not compliant and then you're not happy in the end.
 
Good points! I guess I'll have to experiment a bit and see which is more effective, a slight tint on a normal lense or a complete black out of the chrome with a clear lense. I was thinking of putting in LED style lights so that would help with illumination issues (I hope).
 
No offense but I think your over charging simply because no one else offers these. It's all part of free trade but just thought I'd offer my $.10 And from what I can gather on this board so far group buys go like this... Lots and lots of interests and demands but when it comes time to pay up, the person fronting the $$ gets the shaft. Other than that good luck with the sales. They look really nice.
 
21 - 40 of 174 Posts