Yup, you've heard it right! And this is no BS either. I've found a company overseas that's willing to make custom clear taillights for the G2 Coupes (sedans will follow shortly depending on the interest). This time it will be different from all other attempts someones tried to get custom lenses made. I actually have sample products made and you actually have options too! That's right! Coupe owners have 3 options to choose from:
Red Bottom w/Clear Top
Red Bottom, Clear Top w/Red Surround Border
All Clear
![Image]()
Pricing willl be around $200 - $250 for a set of lenses (depending on the interest). I am testing waters now to see if there are enough interest to get a mass number produced. Meanwhile, the company is nice enough to produce me a few examples of their products with 3 of my specific choices I've given them. I've been doing alot of research on these tail lights and these seems to be the most popular. Since these are only examples, they are actually "first production prototypes" meaning they're all custom made. Fitment is ok, but not great. I've test fitted all of these and they seem to be ok. There are no clip-on tabs at the edges and some corners are cut a little too short (nothing a little extra silicone sealant couldn't help). Also on the clear edges, there are what looks to be clear water or plastic spot blemishes visible (see pics). They're not that noticeable once installed.
With that being said, I am selling these for $200 shipped a pair of lenses +Paypal fees. If I sell all of these and see a great number of interests, then I will ask them to actually make a mold for these to get them mass produced. Now, if a mold was to be made, then the price will have to jump up a little to cover the cost of the molds. And as some of you know, molds are very expensive to make. I will try my best to keep the price under $250 for a set if we happen to go that route. But also keep in mind that products made from molds will be as close to OEM quality as possible. You will get what you paid for.
NOTE: This is for the lenses ONLY. You will have to use your stock housings.
Some Cloudy Spots or Blemishes on the top of the clear section
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
Lenses Installed on housings
![Image]()
![Image]()
![Image]()
Here's some pics of the examples that I took on my car.
RED BOTTOM, CLEAR TOP
![Image]()
![Image]()
![Image]()
RED BOTTOM, CLEAR TOP W/RED SURROUND BORDER
![Image]()
![Image]()
![Image]()
ALL CLEAR
![Image]()
![Image]()
![Image]()
Please email me with any questions at: legends_101@hotmail.com or PM me. (note: I answer my emails more frequently than PMs).
Red Bottom w/Clear Top
Red Bottom, Clear Top w/Red Surround Border
All Clear
Pricing willl be around $200 - $250 for a set of lenses (depending on the interest). I am testing waters now to see if there are enough interest to get a mass number produced. Meanwhile, the company is nice enough to produce me a few examples of their products with 3 of my specific choices I've given them. I've been doing alot of research on these tail lights and these seems to be the most popular. Since these are only examples, they are actually "first production prototypes" meaning they're all custom made. Fitment is ok, but not great. I've test fitted all of these and they seem to be ok. There are no clip-on tabs at the edges and some corners are cut a little too short (nothing a little extra silicone sealant couldn't help). Also on the clear edges, there are what looks to be clear water or plastic spot blemishes visible (see pics). They're not that noticeable once installed.
With that being said, I am selling these for $200 shipped a pair of lenses +Paypal fees. If I sell all of these and see a great number of interests, then I will ask them to actually make a mold for these to get them mass produced. Now, if a mold was to be made, then the price will have to jump up a little to cover the cost of the molds. And as some of you know, molds are very expensive to make. I will try my best to keep the price under $250 for a set if we happen to go that route. But also keep in mind that products made from molds will be as close to OEM quality as possible. You will get what you paid for.
NOTE: This is for the lenses ONLY. You will have to use your stock housings.
Some Cloudy Spots or Blemishes on the top of the clear section
Lenses Installed on housings
Here's some pics of the examples that I took on my car.
RED BOTTOM, CLEAR TOP
RED BOTTOM, CLEAR TOP W/RED SURROUND BORDER
ALL CLEAR
Please email me with any questions at: legends_101@hotmail.com or PM me. (note: I answer my emails more frequently than PMs).
