Acura Legend Forum banner

Do you think this would be ok, or would it burn out.

658 Views 6 Replies 5 Participants Last post by  tw1st
I took the harness out from usdm headlights and was going to wire up my JDMs with the 9006 HID kit for the low beams and use the high beam harness to wire up the foglights. So if I hit the high beams the fogs come on. What do you think?
1 - 3 of 7 Posts
thanks for the help

finally going to hook up my JDMs soon.
ok a little help please

on the stock harness there are green,blue, red and black wires
green positive
black ground
low beam

on the JDM fog light harness there is a white and black wire
so between the blue, white, black and red which one do I connect together?
Fog lights
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.