[lgnd]

Dear Members,

I got many requests for the custom addco bolts so I put money into this project again.

Thanks for looking,

Istvan

First Group Buy: http://www.acura-legend.com/vbulletin/f44/fs-custom-addco-rear-sway-bar-bolts-111950/

Alperovich's review: http://www.acura-legend.com/vbullet...oulder-bots-spc-ball-joints-installed-113567/

The Addco rear sway bar has wider end link than the oem.
OEM bolts are short for the rear Addco sway bar.
Bolts are direct replacement of oem ones and I have 25 sets for sale.

If you have any questions feel free to ask via pm, email or in this topic.

Specification:

-machined off from M16 grade 10.9 bolts.
-radiused neck to prevent breakage
-no threads where the Addco bar sits
-bolts are zinc plated after machine work
-M10 washer
-M10x1.25 nylon insert self locking nuts

One set is:

2 custom bolts
2 washers
2 nuts

Pricing:

1 set shipped to USA: 41USD

If you need more than one set shipping will be slightly higher depending on quantity.

Payment:

Only way of payment is paypal.
Payment address: [email protected]

Shipping:

Shipping method is registered priority airmail 5-10 workdays delivery.
Tracking number is available but no online tracking on usps.com only delivery confirmation.
I think you can get info via phone.
I will send to the buyer paypal email address a photo about the package and a scanned copy of the shipping label.
I'll ship out the bolts in 1-2 workdays after recieved payment.

 

[lgnd]

24 sets left... Thanks for buying!

 

[mktng]

what gains do you get from just the bolts? ... ?

 

[lgnd]

what gains do you get from just the bolts? ... ?

These bolts are stiffer than any other homemade custom bolts. You can use the oem bolt like some other members did, but it's short and I think it's not safe.

 

[stevieray]

what gains do you get from just the bolts? ... ?

"Gains?" Only the reassurance that this bolt is custom-made made specifically for this application, is constructed of superior material and won't break unlike the reused OEM shoulder bolt or whatever substitute you made up.

If you have the ADDCO rear sways, these are worth every penny. Stickied.

 

[lgnd]

Paid!

CHeck your paypal,

thanks Istvan for your Hungarian Ingenuity lol

*that freeway on-ramp is gonna get it now =)

Thank You! Payment recieved bolts will be shipped today. :thumbsup:

23 sets left...

 

[lgnd]

Thanks! You should grease the new bushings only.

 

[Alperovich]

i had a question that came up when i was installing mine.

What's that torque spec on these bolts? i just wanted to make sure i've got them tight enough. when i pulled my sway bar off my wrecked coupe it seemed like they weren't as tight as they could have been

 

[lgnd]

i had a question that came up when i was installing mine.

What's that torque spec on these bolts? i just wanted to make sure i've got them tight enough. when i pulled my sway bar off my wrecked coupe it seemed like they weren't as tight as they could have been

Torque spec is 22 lb-ft (from the service manual)

 

[Alperovich]

yea, that's what i did, i used the factory spec. i just didn't know if there was a spec for these bolts. thanx for the info

 

[lgnd]

^^Thanks! I'm glad you are satisfied. Regarding the movement issue I have no real experience because my sways still waiting to be installed lol...
Tight down the bolts/nuts to oem spec and it should be ok.

 

[Fat Mexican]

any left, I am interested in a set?

 

[lgnd]

any left, I am interested in a set?

PM sent.

 

[lastlegend]

If theres any left, put me down for a set Por Favor :thumbsup:

 

[Biggg72]

another set needed here....any left?

 

[lgnd]

If theres any left, put me down for a set Por Favor :thumbsup:

another set needed here....any left?

Thanks!
Bolts are available. Payment info is on first page.

 

[Biggg72]

payment sent

 

[lgnd]

payment sent

Shipped today. Thanks! :thumbsup:

 

[kotetu]

1 set for me also, please. Payment sent.

 

[Fat Mexican]

PM sent