Acura Legend Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
507 Posts
Discussion Starter · #1 ·
I am looking for legend G1 specific mods (NOT the universal kind).

So far I've seen
Weapon-R intake
Ground Effects (with spolier, and side and rear skirts) (nopionline.com)
I know that a couple of you are working on a custom built cold air intake for the legend. Any word on that?


I've seen fuel pressure regulators, headers, and all that good stuff for a universal fit. Do they fit? And if they don't are there any other G1 legend specific parts that I can buy.

Also, the two best sites I've found are racesearch.com and nopionline.com
Any other places to go?

Thanks
 

·
88 sleeper
Joined
·
1,159 Posts
acpac_jet said:
I've seen fuel pressure regulators, headers, and all that good stuff for a universal fit. Do they fit? And if they don't are there any other G1 legend specific parts that I can buy.
The B&M FPR is Honda specific. & it fits on the legend in the stock location
 

·
Registered
Joined
·
133 Posts
here are my mods. custom is a hard word to define and means different things to different people. i consider any part you put in your car thats not factory oem to be custom, especially if it requires special attention to install.

universal stuff ...like my regulator, msd ingition/coil and stainless steel exhaust had to be 'customated' for my car albeit with little extra effort.

i think i picked up my rotors, pads and breaklines from www.summitracing.com they are very good with shipping and customer service.

Cross Drilled Powerstop Rotors
Axxis Semi-Metallic
Stainless Steel Break Lines
Ferrari break pedals
Weapon-R intake
Weapon-R high pressure fuel regulator
Stainless steel exhaust, high flow muffler [cat back]
Fulda Extremo's 225's on front and back
Carbon Fiber Hood
Chrome Tint
Dynamat sound material
So-Low sound material
waiting to be installed: centerforce clutch, ultralight flywheel
others...
 

·
Registered
Joined
·
8 Posts
I called Summit Racing too, they are awesome. If you guys call, ask for the salesguy named Rocky, he is really smart (unlike some others in this industry), he pointed me in the right direction, really helpful guy. They have a decent selection of parts.
 

·
Registered
Joined
·
133 Posts
gonna post this info somewhere else...
 

·
Registered
Joined
·
180 Posts
Working On fiberglass hoods. Will be able to make one for legend if i have a stock legend hood to mold.

The process for making a hood will take about one week. Depending on how many layers You want the hood to be. It will cost me about 20 dollars to apply a layer of fiberglass. Average hoods use about 4-6 layers. I am currently looking for a company who will supply me with alot of fiberglass for a cheap price. So in a few months, i will be able to drop my price to only 10 dollars a layer.

Pleae e-mail me if you are intrested in this.
( [email protected])

I am also going to work on some hood scoops, that will come free with a hood as an option. I will try to have a few hood scoops to choose from.

Also i will only made the hood, and a frame to support the hood. It will not have any mounting hardware, you will haft to try to find your own way of mounting the hood on to your car. I hear that shops will mount the hood for you. But they charge alot.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top