[Jarryd]

Hey guys Im having trouble removing the front O2 sensor (front meaning rear but its the one that is neer the radiator.) I had to bend out all the a/c pipes just to get the socket on and when i put the rachet or the t-bar on it, it hits the bottom crossmember and doesnt sit on the sensor thus making it impossible to remove the sensor.

 

[Jarryd]

Thanx for that ill try getting it from the top then. I think ill have to remove the Fans and readjust all the a/c pipes then.

 

[Jarryd]

Ill go try that now, i got a 17mm deep socket that i have cut a slit into and a 1/2 inch ratchet. I think ill have to use my costom 3 foot pole to take it off then.

 

[Jarryd]

Done! i got it out and replaced it. I got it off with minimal effort, no pipe was needed (maybe because im 16 and my hands are small so i can get them into those tight spaces. The car is running so sweet now. it truly feels so much better, more responce, better fuel economy damn i should have replaced them a loooong time ago. Thanx for the help guys.

 

[Jarryd]

I think I need to replace mine because my PGM-FI light is coming on. Are you going to replace both? I heard if one is going, the other one is soon to follow...

Yeah i replaced one about a week before this one. No more light for Me

 

[Jarryd]

Yeah there is a difference, its like having an extra 5hp and less stubleing on hard acceleration. Whats wrong with your speedo, it may be a quick fix and you can spend money on a new set of tyers.

 

[Jarryd]

If u need help i use MSN messenger [email protected] or you can just email me if ur having trouble.

 

[Jarryd]

Just remove the fonr beezle and have a look at the cable behind the speedo. but before that check that the cable is sitting in the transmition correctly.