Help - indicators at x2 speed

576 Views 4 Replies 4 Participants Last post by Chuck-Hu$tle, Mar 22, 2003

89LCoupe

Discussion Starter · May 11, 2002

After wiring up my bumper lights as fogs (then unwiring them from the turn lights and using the parking lights alone) my indicators are flashing at double speed - any ideas as to what is causing this?

Save

1 - 5 of 5 Posts

Esti

· #2 · May 11, 2002

usually it means that one of turning blubs are out- But since you were playing with the wiring not sure.

good luck
esti

Save

paulo57509

· #3 · May 11, 2002

89LCoupe said:
After wiring up my bumper lights as fogs (then unwiring them from the turn lights and using the parking lights alone) my indicators are flashing at double speed - any ideas as to what is causing this?

You're the cause.

The reason your turn signals flash faster is because you changed the current load in the signal light circuit by removing the bumper signal bulbs from the circuit.

Save

89LCoupe

Discussion Starter · #4 · May 12, 2002

thanks - looks like i'll have to get some sidemarkers then!

Save

Chuck-Hu$tle

· #5 · Mar 22, 2003

There is no way to slow the turn signals from going double speed?

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month