[G1N00b]

I got a utility trailer for my 89 L coupe, and I'm having trouble wiring up the lights. There is an extra 6-pin connector coming off the left taillight assembly, I assume there is some sort of adapter that could just plug into it, but I can't find one anywhere.

The trailer connector has four wires, ground, left turn, right turn, and taillight.

I was able to get the left and right turn signals and taillight working on the trailer, but not the brake light.

Any idea on how to get the brake lights to work?

 

[digger89L]

Most trailer light kits you buy come with a couple of wiring adapter plugs, and a diagram showing what to connect where. There's nothing in the Acura Service Manual about that extra 6-pin connector. Here's a couple of helpful sites on trailer wiring:

http://www.reeseprod.com/
http://www.diynetwork.com/diy/ab_trailers/article/0,2021,DIY_13699_2271175,00.html

 

[pnoye2]

Most trailer light kits you buy come with a couple of wiring adapter plugs, and a diagram showing what to connect where. There's nothing in the Acura Service Manual about that extra 6-pin connector. Here's a couple of helpful sites on trailer wiring:

http://www.reeseprod.com/
http://www.diynetwork.com/diy/ab_trailers/article/0,2021,DIY_13699_2271175,00.html

I think you'll probably need taillight converter as well G1N00b...

here's another link;
http://www.etrailer.com/wiring.aspx

 

[G1N00b]

looks like this is what I need

. . . since the Legend has separate turn/brake lights:

http://www.etrailer.com/Merchant2/m...e_Code=E&Product_Code=18130&Category_Code=VWH

Thanks for the help

:werd: