[bl420]

the lock and unlock is still under the dash.
trunk is also in the kickpanel

 

[bl420]

to make sure just use a multimeter... what are you looking for specifically?

 

[bl420]

yeah the wire is green/white the problem is though there are multiple green and white wires coming from the same module. I had a heck of a time testing which one it was. My multimeter doesnt always give accurate readings but i'll post a picture of which green/white one it is later.

 

[bl420]

both of my unlock and lock wires.... green/white and green/red

they're both next to each other on the top left row on the right side next to the middle white thingy if you understand what im saying.

this might be able to help you out too

the first pic will show you where the door lock module is and what it looks like...

 

[bl420]

your OEM alarm wont work with remote keyless entry... reason being the only way the OEM alarm will arm itself is if you hit the lock switch inside the car before closing the door.

you can arm your OEM system by simply just doing that... just hit the lock switch. and hit the lock button on your remote and if you see the red led blinking for the OEM security then you have activated both.

 

[bl420]

so my door lock and unlock is in side the door or under the dash??

under the dash right above the accelerator pedal to the right of the steering wheel column

 

[bl420]

under your dash... doesnt matter what year... each year still uses the door unlock module

 

[bl420]

pm ChrisK he installed a reverse camera

I heard that it was a green and red wire.

I believe the reverse wire from the avn2454 is just so that it can switch it on when you're only in reverse.. if thats so i would hook it up to 12v positive and put a switch on it that way i can view it whenever i want.

dont take my word for it though