Are you saying your done with the 3.2? Or planning on using both engines?

-Ed

Either way, if you do this, I'm definately driving up to see it.

 

I must say it is a good start but your not done.

 

well I figure that its just one more thing I can claim I did to go along with my first ever gs conversion and my first ever 300 hp na 3.2

 

yea i c you doin it big so wen do u plan on actually gettin the 3.5 runnin, I wonder when ill be that bored

 

Today was learning experience ..... I woke and decided to do a 3.5 swap today? Now who wakes and just says Ill do a 3.5 swap to day..me I was board!

I got you beat homeslice, I woke up one day and decided to do 2 3.5 swaps

-Matt

 

That motor on the right just looks extra SEXXY! :yumyum:

 

So when you wake up and u wanna run the 3.5 instead of the 3.2 your just gonna swap motors real quick?? :headscrat cause otherwise im lost

 

hes working on the 3.2 for now an swappin in the 3.5 i guess to get the car running

 

Pretty awesome, you sound like me.

 

^Im in the process of doin his 3.5 swap now.

 

waste off money IMO, stick with a typeII:nutkick: :nutkick:

 

the type II has more horsepower. once you change your HG you have nothing to worry about.

 

Yea accept blowing it again. Type I FTMFW!

 

ooookkkkaayyyy when you spend 3k and it doesnt work dont post your complaints on the forum!! good luck with that swap!

 

3.5 swaps never work... :headscrat

-Matt

 

i guess u havent been on the form much to see that many people has done the swap and seen a great improvemnet in legends and that it will work and were are you gettin 3k frm for a 3.5 swap

 

how much does the swap cost?

 

Yeah, who has use for torque anyway?

 

^ I know, it's all about the horsepower, RPMS, redline, Torque, WHP, that dont matter it's all about BHP, and I assure you the Type II has so much more, that it doesnt make sense in any way to switch to the 3.5...

 

everyone know you need more torque to move our heavy cars, what good is having all that horsepower if you cant get it off the line quick enough

 

its just to much of a headache. I'm gonna stick with the type II.

 

I am sure artillery was being sarcastic.

I say if you are swapping motors anyway then do the 3.5, it makes sense to do a real upgrade.

 

Damn, where are you guys finding these cheap rl motors?

 

car-part.com or junk yards. Theres an RL at a junk yard and i can get the whole engine for $100

 

is this 3.5 swap from a type II?? sorry, NOOB! haha. cuz i wouldnt mind getting more UMPH in my whip. ya dig? jw if the type I tranny can deal with a 3.5 swap?

 

A 3.5 is from an RL. You have to use the Legend tranny.

 

I have to admit I was quite displeased to not see a pic of your foot in either of these pictures...

 

so yall are sayin that the hybrid 3.5 block with the 3.2 type II head is the best bang for performance so if that so how much would it be to build that minus having someone install it because that would be something i could do myself
o yea and man i wish my junk yards were givin motors away for under 500 they wanted like 2g for a regular non vtec integra motor i told em there out of their minds

 

so yall are sayin that the hybrid 3.5 block with the 3.2 type II head is the best bang for performance so if that so how much would it be to build that minus having someone install it

All depends on the source you purchase from.

Junk yards:
3.5 motor $300-500
Type II heads & Cams: $150-200
Type II I.Manifold: $25-75
Head gaskets OEM: $200
I.Manifold gaskets OEM: $75
3.5/3.2 custom mount: $50-100 for the mount plus welding
Ecu, Reflashed by Telion $75 plus cost of ecu.
Timing belt/water pump: buy new. Ebay: $100-125
Spark plugs: $$ Depends on what you run.

Total $975-1,350 No labor charges.

 

Your understanding is correct but if you can swing it do it if not just go with the RL heads and TII intake manifold, cams (regrinds preferrably), TII springs (yes they work) and FPR. then your setup should ge solid throught "the curve." and run to a higher RPM without the stress that the RL engine alone experiences. And if there is any doubt about that find the video of my car running to 7200, there is no lag time and this was pre camgrind, and pre aluminum crank pulley

 

u got a link to dat vid

hes having some asshole up in CT do his swap

-Matt

hey im doin his swap:nutkick:

 

i dnt know what the big fuss is, its been said by almost everyone who has done the 3.5 swap that it is worth it so y are people just not accepting it, yea mayb you can rev the 3.2 higher but thats just more stress on parts and even more chances of something going wrong y not have the little more displacement to make up for having to beat the hell out of your motor redlining it

 

Because it's not beating the hell out of it. That motor is designed for higher revs and will take it all year long along with the next year and the next.

I accept that it's worth it for a DD, but not as a better alternative for a racing set up since half the motor would be type II anyway.

This topic is beat to the fullest. I'm out.

 

YEAH!? Well, I swapped in a LS VTEC motor. WE RUN ALL MOTA! I have like, 500 WHP so :bootyshak

 

ALL MOTA GUY!
Ahguy, dude a u like da wickedest bub day'a O sumptin?
Well, I put a 2jz in the trunk, with a turbo'd suppa chaaaged k20 on the roof cause thats like the best spot evva, and a rb26 under the hood with max dufalattas, dual hollypoppa's, and freekin flinstone in the passenger seat.

Do you know what that makes.... Not Haaaus Powwa. Yeeeah, ya know, a... ya know, uuuhm, hmmmm, oh yeah. Well, I couldn't tell you, I'd have to kill you.

 

3.2/5 Hybrid?

 

^ i'm excited to see some F/I

 

haha i knew those dyno graphs would pop up sooner then later why dont you just go hit up the track again before you go FI that way you'll have some official times. Ill most likely want to join in on the fun too, we could have another drag day :yumyum:

 

Wouldnt do me any good. Im less powerful then my setup in June 07' at this point. Wider tires all around, a BBK, aluminum crank pulley and a custom I. manifold built for F/I. The confirmed true + gain would be the crank pulley-confirmed by the way 1st gear rips othewise I dont know what it does to my mid and topend. Car feels too much like before the i. manifold which was a bit less powerful since the wider tires and BBK done in August+. Add to that it needs to be re-tuned(very rich), and I would have to feather a 1000rpm launch on street tires, a drag day with limited runs would be a waste of my time. Isolated street race on a private road offers dead stop runs, rolling runs and topend runs all with something to compare to.
Otherwise a dyno in April will sufice. I need to order me up the new slicks.

~Dv8

 

hmm i might be down, im just about to re-due my exhaust with mandrel bent sst and tig welds cuz you already know my exhaust is ghetto rigged at the moment haha