[kclegend77]

hey whats up everybody. haven't been around to much since nalm 08. been pretty busy with other things. i started working back on the car though so i thought i would share my progress thus far.

got the engine pulled several months back


this is how u remove the exhaust with rounded bolt heads...with a fuckin sawzall. i would only suggest this if u r replacing with obx headers as i am though lol




started pulling apart the engine last week for rebuild.


covers prepped for paint


intake manifold removed




also this may be a good note to most of u out there with cars of this age. hoses i never would have thought to check for replacement. these hoses look terrible. not to mention the rusted out water pipes they connect to. i don't know if it was the coolant used or what.


lots of cleaning to do.




and this is what carbon buildup looks like under your valve covers. use seafoam kids!!!!!!

 

[NuclearSymphony]

Hey, nice work! That is a filthy engine, but we gotta remember how old they are too. Keep it up! What are the overall plans?

 

[sam o nela]

Hey great pics!

Keep us updated on the buildup!

Also I noticed what looks like a pinhole from corrosion on the water pipe that goes under the intake and between the banks....had that things started leaking, talk about an "unfindable leak!!"

 

[dblanehopr]

preciate that pic.. been wanting one of an open topend. next major project on the car is the Tappets and VC gaskets.

also this may be a good note to most of u out there with cars of this age. hoses i never would have thought to check for replacement. these hoses look terrible. not to mention the rusted out water pipes they connect to. i don't know if it was the coolant used or what.

that's regular for any 20+ year car. the hoses are still good unless one is melted or cut. completely reusable. just don't expect them to last another 20 years. as cheap as hose is at your local auto store though, it's better to just replace them. it's just nice to know you don't have to if you're runnin low on cash during a project.

 

[ymisoqt]

Nice work! I'm going to be up there on the 20th, I might have to pop in and take a looksee in person!

 

[dblanehopr]

btw... is that a Pepboy's Big Red lift? i've got the same one.

 

[sam o nela]

that's regular for any 20+ year car. the hoses are still good unless one is melted or cut. completely reusable. just don't expect them to last another 20 years. as cheap as hose is at your local auto store though, it's better to just replace them. it's just nice to know you don't have to if you're runnin low on cash during a project.

Actually quite the contrary...those hoses are typical culprits on the G1 for disappearing coolant for unexplainable reasons...they develop small, slow leaks and are almost impossible to pinpoint the location of the leak due to their close proximity with one another and the fact that they are hidden by so many other things...I would never reuse those bastards bc they are so hard to change as it is already :lol:

Change em all out I say...and dont forget the oil cooler lines that go behind the engine as well!

 

[dblanehopr]

it's all in the time taken to avoid that during the work...

remember, i just pulled my motor and cleaned my entire intake wi/o buying a single oring or gasket. and the only hose i changed was cuz i was trying to tap in my PVC on an aftermarket conefilter.

i'm still using the OEM clamps too.. just made sure they sat correctly.

no leaks.. air or coolant.

if i keep racing the car around dallas i probably will, but if i was a normal driver i'd say everything under the hood is good for a few years.


edit: given, i got lucky none of the hoses were cut or rotting.... like some that i've pulled off of classics. those you gotta replace. but the rotting and corrosion itself is natural.

 

[Artillery129]

why not replace, theyre not even that expensive?

 

[dblanehopr]

completely reusable. just don't expect them to last another 20 years. as cheap as hose is at your local auto store though, it's better to just replace them. it's just nice to know you don't have to if you're runnin low on cash during a project.

cuz when you've only got 50 dollars to your name and your engine it out of your car... things get rigged. hell.. i don't mind..

i've been racing that damn car on the highway almost everyday pissin off ppl that spent 20g's on a car... after pulling my motor and fixing nearly everything for under 20 bucks.

 

[twizzlers]

nice work...lol

are you sending it in for a rebuild or gonna do it yourdelf?

 

[stephen]

It would be a very good idea to clean all the varnish and carbon out of the heads and valve train. If you have access to a power washer you can make a good start by spraying solvent on the parts and power washing them. After that a machine shop could soak them in a solvent tank to clean it up further.

I would replace all the hoses and put a complete gasket set into it.

 

[dblanehopr]

sh.. i thought this was a different thread and you were talking to me. *shaked head* sorry spaced. lol

 

[kclegend77]

Also I noticed what looks like a pinhole from corrosion on the water pipe that goes under the intake and between the banks....had that things started leaking, talk about an "unfindable leak!!"

i don't actually think it was a pin hole yet. i'm definitely replacing it though.

Nice work! I'm going to be up there on the 20th, I might have to pop in and take a looksee in person!

absolutely come on by.

are you sending it in for a rebuild or gonna do it yourdelf?

do all i can myself

 

[kclegend77]

heres whats on the table for her so far

new water pump, timing belt, and tens.


all new suspension parts


all new gaskets


new belts, hoses


these are actually all the radiator and oil cooler hoses. i will now be buying all those other hoses on the manifold.


haha first fuel filter and oil filter changes after the rebuild.


2 new cv shafts


some new accessories and upgrades

custom intake


apc strut bar


new rear mud flaps


tokico blues


intrax springs


new floor mats


parts still to buy:

obx headers
radiator
complete black interior
???????

 

[sam o nela]

^ :bowdown:

 

[kclegend77]

^:bowdown:

thank you. it took me forever to get to this point. that little son of a bitch is a tough engine to remove. so much shit to move or remove. should be much easier going back in though. one thing i forgot to mention is it will be going back in with a 5spd rather than the auto tranny.

 

[NuclearSymphony]

^ What Gabe said . . . that's quite a parts list there! Major props to you on doing it the right way and replacing with new. :thumbsup: Upgrades too yet . . . hope to see this at N09!

 

[l4zy415]

apc strut bar

I didn't know they made one for the G1? How much did you get it for and where?

Glad to see your replacing the old stuff on the motor to new stuff :thumbsup:.

 

[kclegend77]

^ What Gabe said . . . that's quite a parts list there! Major props to you on doing it the right way and replacing with new. Upgrades too yet . . . hope to see this at N09!

my goal is having a pretty close to showroom quality car when its done. i rented a damn car for nalm08. u better believe my baby will be making it next year. the only thing that may not be done on her by then is paint and body work. if all goes as planned she will be road ready for spring.