[91LSMAN]

Ummmm, what?

Ya, the Legends dont' have too many products compared to Civics, Accords, etc. but I am grateful that we have more than some less fortunate.

He is using the Acuraworld "Lingo". They have a smily over there that says TITS on a sign that it holds up and everyone over there uses that to say that a car looks really good.

 

[sleeprlegendcp]

Welcome to the Legend Family!!! I say this to both of you!
Later!
Lee

 

[RL21]

Re: Re: PIX

Just spray a little silicone lubricant along the length of the window channels and run the windows up and down a couple times to spread the lube. I wouldn't use WD40 because I've heard that stuff tends to eat away and harden rubber over time. And yes, a little will get on your windows but most of it is concealed inside the channel so you won't see it. The rest you can just wipe/clean off without a problem. Just use a little lube at a time if you're concerned.

how do i get to channel? im confused i roll the window down first? or do i keep it up and then pull back the rubber and do i pull back the rubber on the inside of the car or the outside of the car, and do i need to use like a little straw to direct the silicone better? please help. im just worried that maybe the motors are going bad i would hate to c that happen its in all 4 windows sso chances are probably very slim

 

[LEGENDarith]

Welcome! I'm glad that Matt created the RL section. I've always considered TLs and RLs (even cls) as part of the legend family.

 

[Mike Diaz]

Re: Re: Re: PIX

how do i get to channel? im confused i roll the window down first? or do i keep it up and then pull back the rubber and do i pull back the rubber on the inside of the car or the outside of the car, and do i need to use like a little straw to direct the silicone better? please help. im just worried that maybe the motors are going bad i would hate to c that happen its in all 4 windows sso chances are probably very slim

What you should do is roll the windows down, and spray the track that the window slides on. It should feel like felt. you spray a good amount of silicone on there and roll the window up and down a few times to lube it up. A small straw will help direct the silicone better.

 

[RL21]

windows

the channel on both sides or on one?

 

[KilroyNo1]

I'm another RL n00bie here, got the link from the AcuraWorld forums. I'll get some pics up asap. Can somebody direct me to a good hosting site?

I had an '88 Legend coupe done up real nice before my RL and this totally sold me on Acura quality. I'll get pics of both of em up soon.

 

[RenoG]

All the places the window come in contact with.

 

[RL21]

silicone

which silicone do i get? will they know at pepboys when i say i need silicone? my idea of silicone is the stuff that patches holes for waterproofness is this silicone diff?

 

[Train]

Re: silicone

which silicone do i get? will they know at pepboys when i say i need silicone? my idea of silicone is the stuff that patches holes for waterproofness is this silicone diff?

You'll want silicone lubricant. The stuff you're referring to is silicone sealant...you definitely don't want that. It should be right next to the WD40 and will say silicone lubricant right on the can. It should come with a little straw too.

 

[RL21]

windows

ok awsome thanx im gonna try that out tonight, i was also told it might be like the regulator on the window so i might have to tighten it too but ill try this first thnx a lot for the help

 

[SpeedDemon]

I'm really glad to see the 3rd and 4th Generation Legends are coming. Welcome to all the new members, glad to continue the Legend families greatness with some of Acuras newer cars.

 

[SiHawk]

My RL pic...

 

[Hutch1]

hello peoples, i'm new in here to!

 

[Fabvsix]

I would post lots of zaino pictures, wood dash pictures etc... but this web site doesn't allow posting pictures like ALL others do......I am NOT interested in phote bucket.com and the like, so don't go there.....

 

[JTJohnny102]

welcome to all the new members, hopefully ull find what you need or any questions that you have answered, again welcome to the forum