Acura Legend Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
3,484 Posts
sand paper is your best bet. sand down to the plastic then use 2000 grit to smooth it out then use plastic polish and rubbing compound.

on my sc400, i tried to take off the red enamel i put on. i tried using everything and didn't have much luck. so i used aircraft remover and it ruined the taillights.... life lesson, don't use aircraft remover.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top