Acura Legend Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hey guys. This is my legend. The skirt is actually a hand carved plug from which we'll make a mold, then make the skirt.
The indentations under the stock fog lights will be cut out leaving a large opening for grill or lights or both.
The cutout under the grill area of the hood is for a lighted plate that says ccconcepts. The hood is inducted to my air box which now holds a k&n cone filter.
Sorry car looks like sh!t i hit a dear recently. Here are the pictures.

http://www.geocities.com/ccconcepts2002/00.jpg
http://www.geocities.com/ccconcepts2002/000.jpg
http://www.geocities.com/ccconcepts2002/fronttop.jpg
http://www.geocities.com/ccconcepts2002/grayfront.jpg

As you can see, the plug still needs finish work.

Heres an old pic:
http://www.geocities.com/ccconcepts2002/Untitled-4.jpg

Rob
 

·
Registered
Joined
·
2,796 Posts
blklegend said:
You have to cut and paste the address.

:D
Still doesn't work.:rolleyes:
 

·
Registered
Joined
·
744 Posts
I wonder what the difference in weight is on the hood - I imagine the stock hood weighs a good bit more than the fiber.

KNLNGUS
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #15 ·
Original weighs over 40lbs. This one 24. We made a carbon hood for a 3rd gen prelude race car that weighed 9lbs even. It was a little flexable but not much.
This hood as well as the Lude hood I mentioned are sandwich core constructed. We sandwich a thin layer of foam between several layers of fiber glass (or carbon,kevlar). The foam adds strengh, stiffness and insulation from engine noise.

Rob
CCC
 
1 - 15 of 15 Posts
Top