Acura Legend Forum banner

Preparation and installment of emblems.

1689 Views 29 Replies 14 Participants Last post by  91LSMAN
I purchased a set of used emblems to badge the rear of my naked Legend and have a few questions on preparation and installment.

1. Being that they are used, the clearcoat is worn off a bit and I would like to add a nice layer of it on them. Any products recommended?

2. What is used to paste the emblems?

3. And the most important part, is there a diagram showing the exact OEM positions for the emblems on 1994 and 1995 Coupes? Meaning, how far apart are the L E G E N D letters, their height above the keyhole, and the position of the upper left Acura emblem.

I have OCD and want this done right. If any of you have time and a ruler, I would appreciate some numbers or a nice little diagram showing me this. :D

I swear I did many searches and nothing answered the above questions.
1 - 2 of 30 Posts
Shaylord said:
from ur sig looks like the chrome in headlights was painted a satin grey?
They were painted flat gray to cut down on the glare from the S2000 projectors. :)
misdeismo said:
I know this has nothing to do with the topic of this thread but i couldnt stop laughing at your socks. :giggle:
bwahahaha, busted with the limp tubesocks.... :bowdown: :giggle: :eek2:

sorry 91ls :(
1 - 2 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top