Acura Legend Forum banner

Preparation and installment of emblems.

1681 Views 29 Replies 14 Participants Last post by  91LSMAN
I purchased a set of used emblems to badge the rear of my naked Legend and have a few questions on preparation and installment.

1. Being that they are used, the clearcoat is worn off a bit and I would like to add a nice layer of it on them. Any products recommended?

2. What is used to paste the emblems?

3. And the most important part, is there a diagram showing the exact OEM positions for the emblems on 1994 and 1995 Coupes? Meaning, how far apart are the L E G E N D letters, their height above the keyhole, and the position of the upper left Acura emblem.

I have OCD and want this done right. If any of you have time and a ruler, I would appreciate some numbers or a nice little diagram showing me this. :D

I swear I did many searches and nothing answered the above questions.
1 - 2 of 30 Posts
ORIG 91LSMAN: When I re-badged my Legend from gold to silver and re-did the rear of Dad's Legend I bought new emblems both times and when you buy new they have adhesive already on them.
Quick Help, I want to re-do my trunk lid, but I'm not sure what it takes to get the old letters off, and I'm afraid to damage the paint.

How did you remove the letters, and what did you do to prep the paint prior to putting the new letters on?

YO bro, I wanted to say something, but figured I'd better get the help I need first!


Not only the socks, but what kind of shorts are you wearing??????????????????????////

1 - 2 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.