Acura Legend Forum banner

Preparation and installment of emblems.

1684 Views 29 Replies 14 Participants Last post by  91LSMAN
I purchased a set of used emblems to badge the rear of my naked Legend and have a few questions on preparation and installment.

1. Being that they are used, the clearcoat is worn off a bit and I would like to add a nice layer of it on them. Any products recommended?

2. What is used to paste the emblems?

3. And the most important part, is there a diagram showing the exact OEM positions for the emblems on 1994 and 1995 Coupes? Meaning, how far apart are the L E G E N D letters, their height above the keyhole, and the position of the upper left Acura emblem.

I have OCD and want this done right. If any of you have time and a ruler, I would appreciate some numbers or a nice little diagram showing me this. :D

I swear I did many searches and nothing answered the above questions.
1 - 2 of 30 Posts
Use all weather 3M double sided adhesive tape. The stuff is thick and light grey with red vinyl protector wrapped on a spool. I buy the stuff at Staples all the time.
I've done it with the tape (on my sister's 91 coupe). If you cut it right, the thickness is not an issue. If you prep it right, it will create a strong bond. I'd never attach something to my car with 2 part epoxy b/c if you don't get it perfect the 1st time, you're screwed.
1 - 2 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.