Acura Legend Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
FYI, I'm having the window shuttle for the 1st gen legend coupe recreated by a machinist. The part will be aluminum (WAY stronger than oroginal) with a wear strip in place of the rollers for simplicity. I'll let you all know how it comes out. Also, let me know if there's any interest in these. Cost should be around $100 each but may be lower if demand is there.
 
1 - 2 of 2 Posts
Top