s2000...leon/DV8/jose/KlnGUS...i need yo help

1031 Views 9 Replies 7 Participants Last post by sleeprlegendcp, Jun 26, 2002

95coupe

Discussion Starter · Jun 17, 2002

Ok this silver s2000 evolution stickers all over, aftermarket exhaust and i dont know what else.....we keep zippin and out of traffic, he gets a opening seeing me ( i was being aggresive..) he GUNS, sipz by ...i was like ok i m not backing off, follow him to a light he cuts a left i m right on his ass ...GRREEEEENnnn

he took OFF....and so did i right on his, tail 0 to 100-105 he stayed the initial 2 car lengths ahead of me, i couldnt gain nor could he( if only i could DOWNSHIFT...ARGGG)))...then we stop at the next light, next to each other, i think he gave up so we went like 70 and were comign to the other light...ok JOSE i need that numbe for drilled rotors and new pads...dude, i couldnt stop...i stopped right on the line, and all 4 of my wheels had smoke coming out....

Leon/DV8 - need that CAI man, tell me where i send the money....

KLNGUS- bro use my shop hook my mastercylinder this weekend, jose said the work was great on the six speed.

Save

1 - 10 of 10 Posts

C25A1guy

· #2 · Jun 17, 2002

95coupe said:
dude, i couldnt stop...i stopped right on the line, and all 4 of my wheels had smoke coming out....

Hehehe. SOunds like the day after I got new pads on my car. I was driving around the SFV (San Fernando Valley for you non-so.cals) and I was drive pretty aggrisively. My friend and I noticed a smell like burning plastic. Ignored it. Got to Plumer and woodman, and out of all 4 wheels, heavy amount of smoke just pillowing out of my wheels. Me and my friend was like OH SH!T!!!!

All these people was stairing at me and my car. LOL. We pulled into the Sav on/Vons parking lot and stopped the car. Just a hudge amount of smoke billowing out of the wheels. people was looking at my car and were like "Oh my".

Waited there for like 30 min, waiting for the wheels to cool.

Oh, and in case you were wondering what type of pads these were, they were just a set of Bendix pads that one of my mechanics from 76 installed.

Save

95coupe

Discussion Starter · #3 · Jun 17, 2002

I m not sure if it was just heavy braking in and out of those 3 traffic lights, cause my brakes work fine...but guess what my car is being inspected right now, its back in the shop pads and rotors are being checked...and im ordering cross drilled rotors and better pads....

see i like going 0-100 fast but i will like it to be faster when i wana to 100- 0

all is well now..... but i need that new CAI.. dv8????

Save

KNLNGUS

· #4 · Jun 17, 2002

95coupe, I'm going to be a little busy for next couple weekends... but when your rotors and pads come in... That will be the best time to install the Mastercylinder and put new fluid in.

Now if you MC has not s h i t the floor, then I say $25.00 to put new rotors and pads in and I will do it while you wait - but I'm trying to make amends with my girlfriend and I need to reserve my "free time" to co-ordinate other activities.

And that means... if we can hook up a time... and I can get you to drive down... I can have everything out and waiting for you to pull up.

BTW - bring two bottles of HONDA power steering fluid and I large bottle of prestone DOT 3 (from walmart) and I will pump and fill the power steering reservior, and pump and fill the ABS reservior at no cost.

I just have to play it cool, duck in and out when I can, and try to wash my hands before I caress my girlfriends face.

KNLNGUS

Save

jose3030

· #5 · Jun 17, 2002

95coupe said:
Ok this silver s2000 evolution stickers all over, aftermarket exhaust and i dont know what else.....we keep zippin and out of traffic, he gets a opening seeing me ( i was being aggresive..) he GUNS, sipz by ...i was like ok i m not backing off, follow him to a light he cuts a left i m right on his ass ...GRREEEEENnnn

he took OFF....and so did i right on his, tail 0 to 100-105 he stayed the initial 2 car lengths ahead of me, i couldnt gain nor could he( if only i could DOWNSHIFT...ARGGG)))...then we stop at the next light, next to each other, i think he gave up so we went like 70 and were comign to the other light...ok JOSE i need that numbe for drilled rotors and new pads...dude, i couldnt stop...i stopped right on the line, and all 4 of my wheels had smoke coming out....

Leon/DV8 - need that CAI man, tell me where i send the money....

KLNGUS- bro use my shop hook my mastercylinder this weekend, jose said the work was great on the six speed.

Raceconcepts:
[email protected]
email address
email em and he'll respond quickly , ask for his phone # and order it w/ your visa/master card. for me , it was $347 shipped. them rotors look NICEEEEEEEEEEEE

Save

502 MotorSports

· #6 · Jun 18, 2002

wow, looks like you are all ocvered here...do you already have an intake?

Save

95coupe

Discussion Starter · #7 · Jun 18, 2002

NO

No i dont....in fact i just checked Dv8s posts...and he is saying 245....well i guess the price of HP....hmmmm i m just gonna order it....once it gets installed i dont think i will be thinking of money...

thanks leon....BTW if i build a CAI your way i know its cheaper....but is it almost the same effect as Dv8???

Save

502 MotorSports

· #8 · Jun 18, 2002

Re: NO

95coupe said:
No i dont....in fact i just checked Dv8s posts...and he is saying 245....well i guess the price of HP....hmmmm i m just gonna order it....once it gets installed i dont think i will be thinking of money...

thanks leon....BTW if i build a CAI your way i know its cheaper....but is it almost the same effect as Dv8???

I do not have a dyno sheet, but I do know it has helped me move a whole lot quicker than before...plus low end torque and high end hp are improved greatly.

Save

Dv8

· #9 · Jun 26, 2002

All i have is countless videos, timeslips, and one old Dyno.

i was running 15.5's then with a dryer hose intake connection dyno at 185 WHP. Ran 14.1-14.0 W/NOS NOW i run 15.2 with my new intake and 13.5 W/NOS havent dynoed it since, NON NOS. recent Dyno with NOS 267WHP 231lbft

DOnt you have TCS?

~Hybrid

Save

sleeprlegendcp

· #10 · Jun 26, 2002

I killed a yellow on black S2000 yesterday on the interstate. We went at it twice. He had no hope! I was gone before I hit 4th. These were races starting at 65mph. He followed me off the interstate, so we went at it again. I killed him from 10mph to 60mph. Just my experience!
Later!
Lee

Save

1 - 10 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month